Product Info Sheet
Available In stock
Product Code - 80005
Availability - In stock
Delivery Time - 1-7 Days.
Note: Product usually ships within 24 hours of payment/order.
This wall mount can be used as a universal support system for VESA compatible monitors, touchscreens and terminals for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
Attaches to a wall or other vertical surface.
Provides a seven axis postion adjustament. Arm extends and retracts 6”
Supports touchscreens, terminals or monitors up to approximately 22” or 20lbs.
This assembly is made from steel and finished with a durable, black, low gloss, micro finish powder coat that resists fingerprints.
All wall mount assemblies can be ordered with an optional Stud Bridge Mounting Plate PN 50546 that can support multiple mounts and attaches across a pair of vertical wall studs spaced at 16" on center.
Select the Product Info Sheet link at the top of this page for detailed information.
Single Position 25LB Mounting Plate Features
Attaches directly to a wall or any other flat vertical surface.
Includes multiple slots for cable tie points.
Includes four integral welded gussets which greatly strengthen the assembly.
Can also be attached to a pole up to 36” in diameter with optional strapping kit PN 80801 or any compatible hose clamps.
Multi Adjustable Arm Features
The arm can be adjusted side to side and locked in one of many preset positions by tightening a lock screw that indexes into a series of locking holes.
The downward or upward angle of the arm can be adjusted at each end with a lock pin.
The arm length can be adjusted up to 6” with a three point knob.
There are three extension arm lengths available. Please specify when ordering.
8.5” long lower arm section allows the mount to extend from 19.5” to 25” order PN 80005
20” long lower arm section allows the mount to extend from 30” to 36” order PN 80005-3036
26” long lower arm section allows the mount to extend from 36” to 42” order PN 80005-3642
Biased Pan and Tilt Head Features
This assembly includes a 75/100mm VESA compatible screen biased pan and tilt head. If your assembly includes an adapter plate for a proprietary screen type please refer to the pages that include information specific to that application.
The bias position, used to level the screen horizontally, can be easily adjusted with a three point knob.
The screen pan position, or rotation, can be easily rotated side to side and secured in any position with a five point knob. The pan position can also be permanently secured by tightening a lock screw.
The screen tilt position can be easily adjusted up and down and secured in any position with two four point hand knobs. The tilt position can also be permanently secured by tightening two lock screws.
Thick nitrile rubber washers provide a positive, non slip, clutching grip to insure the head stays in position.
Also available in an optional Ceiling Mount configuration
8.5” long lower arm section that allows the mount to extend from 19.5” to 25” order PN 80104
20” long lower arm section that allows the mount to extend from 30” to 36” order PN 80104-2026
26” long lower arm section that allows the mount to extend from 36” to 42” order PN 80104-2632