5 Axis Counter Top Mount with a 15” Arm, a Panning Mounting Plate and a VESA Pan & Tilt Head

$295.00
In stock
Product Code
80105
5 Axis Counter Top Mount with a 15” Arm, a Panning Mounting Plate and a VESA Pan & Tilt Head is available to buy in increments of 1
More Information
Product Code 80105
Availability In Stock
Delivery Time 1-7 Days
Note Product usually ships within 24 hours of payment/order.
  • For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

  • This articulating Countertop VESA mount can be used as a universal support system for all 75mm or 100mm VESA compatible monitors, touchscreens and terminals for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
  • An innovative set of joint assemblies allow five axis of position adjustment when attached to a countertop wall, shelf or other flat, horizontal surface. Similar assemblies in wall and ceiling mount configurations are also available.
  • Beyond having flexible articulation; this mount has the key feature of being easily LOCKED in any desired screen position; this ability is VERY important when using touch screen equipment as it PREVENTS the screen from moving away from the user each time a touch is input.
  • This assembly supports up to 25 lbs., is made from steel and finished with a durable, black, low gloss, micro wrinkle powder coat that resists fingerprints.
  • This mounting package includes the following individual components PN 67099, PN 67045, PN 67080, PN 50638, PN 67046
  • Visit kitchendisplaysystems.com for a free, easy to understand tutorial that covers all aspects of Kitchen Display Systems knowledge!

Standard VESA 75-100mm Pan and Tilt Head on an Offset Arm Bracket and lower arm

  • A universal mount that works with any 75mm or 100mm VESA compatible screen.
  • Tightening the 2 four-point knobs applies variable clutching resistance to allow adjustment of the up and down tilt position of the screen. Tighten either of the two 10-32 Phillips head screws adjacent to the four-point knobs to permanently secure the tilt position.
  • Tightening the five- point knob below the Offset bracket applies variable clutching resistance to allow adjustment of the side-to-side pan position of the screen. A 10-32 Phillips head screw in the center of the lower Panning plate can be tightened to permanently secure the pan position.
  • Tighten the 10-32 Phillips head screw on the lower Panning plate into one of the holes in the Offset bracket to permanently secure the pan position.
  • The Offset Bracket attaches the VESA pan and tilt head to the end of the arm and allows adjustment of the up and down “Offset angle” of the arm.
  • Adjusting the Up and down position of the arm at the Offset bracket: Remove the 1/4” Wire-Lock Clevis Pin from the Offset Bracket to adjust the up and down position of the arm; then reinsert the pin into one of the holes in the Offset bracket and through the arm to secure the new position.
  • Includes 4 pieces of M4 Phillips head screws to attach the VESA mounting plate to the back of the screen.

Panning Countertop Mounting Plate, Offset Bracket and Arm

  • The Panning Countertop Mounting Plate supports one arm assembly and can be attached to any flat, smooth horizontal surface.
  • Attach the mounting plate to the mounting surface with appropriate fasteners.
  • The side-to-side pan position resistance is preset at the factory with a 5/16” bolt in the center of the upper standoff plate to allow the arm offset bracket to move freely side to side and should not need adjustment. However, a ½” wrench can be used to adjust the tension on this bolt.
  • To adjust the side-to-side pan position of the Offset Bracket and Arm; remove the 10-32 Thumbscrew from the top of the Panning Countertop Mounting Plate; adjust the arm position, then reinstall the thumbscrew into one of the holes in the top of the round section on the mounting plate.
  • The Offset Bracket attaches the arm to the Panning Countertop Mounting Plate and allows adjustment of the up and down “Offset angle” of the arm.
  • Adjusting the Up and down position of the arm at the Offset bracket: Remove the 1/4” Wire-Lock Clevis Pin from the Offset Bracket to adjust the up and down position of the arm; then reinsert the pin into one of the holes in the Offset bracket and through the arm to secure the new position.
  • Note; it is best to keep the Offset positions of both the upper and lower Offset brackets on an arm assembly “matched” so that the Panning base of the VESA head remains horizontal. Example; if the upper Offset bracket and the Mounting plate is set to place the arm in the 1st position at an outward angle from the wall; then the position of the Lower Offset bracket should be set to the 1st position in the opposing angle to match it and keep the Panning base of the VESA head horizontal.

We believe in ethical SEO relevancy; the following section was included to assist the all-knowing algorithms in locating this page; however, some humans like it too. 

  • Fully articulated countertop mount, VESA countertop mounting bracket, VESA countertop mount bracket, Screen countertop mount, screen countertop mounting bracket, screen countertop mount bracket, monitor countertop mount, monitor countertop mounting bracket.
  • Monitor countertop mount bracket, POS terminal countertop mount, POS terminal countertop mounting bracket, POS terminal countertop mount bracket, Point of Sale POS terminal countertop mount, Point of Sale terminal countertop mounting bracket.
  • Point of Sale terminal countertop mount bracket, KDS countertop mount, KDS countertop mounting bracket, KDS countertop mount bracket, Kitchen Display System countertop mount, Kitchen Display System countertop mounting bracket. Kitchen Display System countertop mount bracket, Kitchen production System countertop mount, Kitchen Monitor countertop mount.
  • Kitchen video countertop mount. Touchscreen countertop mount, All in One PC countertop mount, Healthcare monitor countertop mount, Industrial process monitor countertop mount, Kiosk countertop mount, Office monitor countertop mount, manufacturing process monitor countertop mount.
Write Your Own Review
You're reviewing:5 Axis Counter Top Mount with a 15” Arm, a Panning Mounting Plate and a VESA Pan & Tilt Head
5 Axis Counter Top Mount with a 15” Arm, a Panning Mounting Plate and a VESA Pan & Tilt Head
Copyright © 2024 Practical Quality Systems