7 Axis Ceiling Mount with Extendable Arm and Biased WS6 Pan and Tilt Head and a PS holder

$395.00
In stock
Product Code
80104-MICROS
7 Axis Ceiling Mount with Extendable Arm and Biased WS6 Pan and Tilt Head and a PS holder is available to buy in increments of 1
More Information
Product Code 80104-MICROS
Availability In Stock
Delivery Time 1-7 Days
Note Product usually ships within 24 hours of payment/order.
  • For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

  • These articulating ceiling mounts support MICROS terminals with the MICROS Quick Connect tabs and slots mounting standard for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
  • An innovative set of joint assemblies allow seven axis of position adjustment when attached to a Ceiling shelf or other flat, horizontal surface. This assembly is also available in wall and countertop mount configurations.
  • Beyond having very flexible articulation; this mount has the key feature of being easily LOCKED in any desired screen position; this ability is VERY important when using touch screen equipment as it PREVENTS the screen from moving away from the user each time a touch is input.
  • This assembly supports up to 25 lbs., is made from steel and finished with a durable, black, low gloss, micro wrinkle powder coat that resists fingerprints.
  • This mounting package includes the following individual product components PN 67099, PN 67046, PN 50121, PN 50124, PN 67045, 67081, PN 80805.
  • Visit kitchendisplaysystems.com for a free, easy to understand tutorial that covers all aspects of Kitchen Display Systems knowledge!

Enhanced MICROS compatible Pan and Tilt Head with side-to-side tilt adjustment on an Offset Arm Bracket

  • A universal mount that works with any MICROS compatible terminal with then tabs and slots standard.
  • Tightening the 2 four-point knobs applies variable clutching resistance to allow adjustment of the up and down tilt position of the terminal. Tighten either of the two 10-32 Phillips head screws adjacent to the four-point knobs to permanently secure the tilt position.
  • Tightening the five- point knob below the Offset bracket applies variable clutching resistance to allow adjustment of the side-to-side pan position of the terminal. A 10-32 Phillips head screw in the center of the lower Panning plate can be tightened to permanently secure the pan position.
  • Tightening the three - point knob at the rear center of the MICROS compatible mounting plate applies variable resistance to allow adjustment of the side-to-side terminal tilt position.
  • Tighten the 10-32 Phillips head screw on the lower Panning plate into one of the holes in the Offset bracket to permanently secure the pan position.
  • The Offset Bracket attaches the MICROS compatible pan and tilt head to the end of the arm and allows adjustment of the up and down “Offset angle” of the arm.
  • Adjusting the Up and down position of the arm at the Offset bracket: Remove the 1/4” Wire-Lock Clevis Pin from the Offset Bracket to adjust the up and down position of the arm; then reinsert the pin into one of the holes in the Offset bracket and through the arm to secure the new position.

Telescopic Arm Section

  • The overall length of the Telescopic arm section can be adjusted up to 6 inches. To adjust; grasp the inner arm and slightly loosen the three-point knob just until the inner arm can be moved. Pull the inner arm out to extend it or push it in to retract the arm to the desired new length; then retighten the knob to secure the position.

Panning Ceiling Mounting Plate, Offset Bracket and Arm

  • The Panning Ceiling Mounting Plate supports one arm assembly and can be attached to any flat, smooth horizontal surface.
  • Attach the mounting plate to the mounting surface with appropriate fasteners.
  • The side-to-side pan position resistance is preset at the factory with a 5/16” bolt in the center of the upper standoff plate to allow the arm offset bracket to move freely side to side and should not need adjustment. However, a ½” wrench can be used to adjust the tension on this bolt.
  • To adjust the side-to-side pan position of the Offset Bracket and Arm; remove the 10-32 Thumbscrew from the top of the Panning Ceiling Mounting Plate; adjust the arm position, then reinstall the thumbscrew into one of the holes in the top of the round section on the mounting plate.
  • The Offset Bracket attaches the arm to the Panning Ceiling Mounting Plate and allows adjustment of the up and down “Offset angle” of the arm.
  • Adjusting the Up and down position of the arm at the Offset bracket: Remove the 1/4” Wire-Lock Clevis Pin from the Offset Bracket to adjust the up and down position of the arm; then reinsert the pin into one of the holes in the Offset bracket and through the arm to secure the new position.
  • Note; it is best to keep the Offset positions of both the upper and lower Offset brackets on an arm assembly “matched” so that the Panning base of the MICROS compatible pan and tilt head remains horizontal. Example; if the upper Offset bracket and the Mounting plate is set to place the arm in the 1st position at an outward angle from the wall; then the position of the Lower Offset bracket should be set to the 1st position in the opposing angle to match it and keep the Panning base of the MICROS compatible pan and tilt head horizontal

There are three extension arm assembly sections available. Please specify when ordering.

  • PN 80104-MICROS with an 8 ½”L arm which allows the mount to extend from 14”L to19 1/2”L
  • PN 80104-20-MICROS with a 20”L arm which allows the mount to extend from 26”L to 31 ½” L
  • PN 80104-26-MICROS with a 26”L arm which allows the mount to extend from 32” to 37 ½” L

We believe in ethical SEO relevancy; the following section was included to assist the all-knowing algorithms in locating this page; however, some humans like it too. 

  • MICROS Ceiling mount, MICROS Ceiling mounting bracket, MICROS Ceiling mount bracket, MICROS Terminal Ceiling mount, MICROS Terminal Ceiling mounting bracket, MICROS Terminal Ceiling mount bracket.
  • MICROS Point of Sale terminal Ceiling mount, MICROS KDS Ceiling mount, MICROS KDS Ceiling mounting bracket, MICROS KDS Ceiling mount bracket, MICROS Kitchen Display System Ceiling mount.

Below is a partial list of Oracle MICROS compatible Terminals that use the MICROS Quick Connect tabs and slots mounting standard:

  • Oracle MICROS Workstation 625X.
  • Oracle MICROS Workstation 655X.
  • Oracle MICROS Workstation 6 POS Terminal.
  • Oracle MICROS Workstation 610.
  • Oracle MICROS Workstation 620.
  • Oracle MICROS Workstation 625.
  • Oracle MICROS Workstation 650.
  • Oracle MICROS Workstation 625.
  • Oracle MICROS Workstation 655.
  • Oracle MICROS Compact Workstation 310.
  • Oracle MICROS Express Station 4 Series.
  • Oracle MICROS Express Station 400.
  • Oracle MICROS Express Station 410.
Write Your Own Review
You're reviewing:7 Axis Ceiling Mount with Extendable Arm and Biased WS6 Pan and Tilt Head and a PS holder
7 Axis Ceiling Mount with Extendable Arm and Biased WS6 Pan and Tilt Head and a PS holder
Copyright © 2024 Practical Quality Systems