Mini Office Enclosure Free Standing 72”W x 36”H w/ 45”W Lower Cabinet

$7,105.00
Out of stock
Product Code
81034
More Information
Product Code 81034
Availability Out of Stock
Delivery Time 1-7 Days
Note Product usually ships within 24 hours of payment/order.

Product Specifications:

Configured as a free standing desk. Includes 3 Side Support assemblies with 6 Leveling Legs, a locking Roll Up Door, a light, an 18”W Wire Rack Shelf, a 34”H Side Shelf System with a 18”W Side Shelf, a Modular Ventilation System with 4- fans, an outlet strip, cable management rings, a VESA monitor mount, 4-Bin Boxes 5 3/8"L x 4 1/8"W x 3"H, 4-Bin Boxes 7 3/8"L x 4 1/8"W x 3"H and 2-19"W Bin Box Mounting Bars, a Lower Cabinet assembly with 2 doors and a 44.75"W x 28"D interior shelf. When the 45” wide Lower Cabinet is installed below one side of a 72”W Enclosure it creates a 26”W open space for a chair on the opposite side.

Interior Space: 70.39”L x 26.87”D x 28.06”H (to bottom of door housing) & 28.87”H (to bottom of vent box) or about 30.71 cubic feet.

Weight: 72 x 36 Freestanding With 45" Lower Cabinet (Bare) = approx 600 lbs. Note: This weight does not include any options or accessories.  Each Enclosure will probably contain at least 50 lbs. of accessories.

Roll Up Door
The sectional Roll Up Door that is included on all Enclosures doesn’t require any room to swing open; instead it coils around a load balancer unit that is installed inside of housing behind the header above the opening of the Enclosure. The load balancer greatly reduces the weight of the door to make opening and closing the door smooth and easy. The doors and tracks are constructed of sturdy, extruded anodized aluminum. The door panels feature self lubricating guides and integral hinges. All doors include a rugged keyed lock that extends two heavy duty latches into the door track on both sides.

Cable Path Openings
All 72”W Enclosures feature eight large and convenient Cable Path Openings with fully adjustable covers make the installing cabling and power cords quick and easy. There are two openings near the left and right rear corners of the top panel and one in the middle, two near the left and right rear corners and one in the middle of the bottom panel and one opening on each of the lower rear corners of the left and right side panels.

Enclosure Top Panel
The Enclosure top panel is made of 18 gauge Stainless Steel with welded corners for added strength. It has been pre marked with small indentations that mark the locations of the 5/16” holes that are needed for adding optional Vertical Shelf Standards to support shelves or an Upper Cabinet.

Inner Rear Panel
The Inner Rear Panel of all Enclosures has been predrilled to permit easy attachment either vertically and horizontally of multiple Cat5E Network Patch panels, 66M type Telephone Terminal blocks or any other device that uses an industry standard 89D bracket. It is also predrilled to allow attachment of Cable Management Rings, 18” Wire Rack Shelves or Bin Box Mounting Bars.

Insert Plates
These ¼” thick steel “Insert Plates” are used to attach the main structural components together. They are installed in each of the four corners of the support C beams in the bottom panels of all Enclosures and Table Tops. These plates create “hard points” that add extra strength for attachment of Side Supports to the bottom panels of Enclosures or the undersides Work Tables. They also are used to attach Leveling Legs or caster wheels directly to Enclosures or to Side Supports for Enclosures or Work Tables.

Leveling Legs and Optional Caster Wheels
All Enclosures feature adjustable Leveling Legs that allow quick and easy leveling on uneven surfaces. The foot of each leveling leg includes a movable mounting strap that swivels around the leg and permits simplified attachment to the mounting surface. If a mobile solution is desired, simply remove the Leveling Legs and add the optional Caster Wheel kit- PN 60103. These wheels are intended for temporary use and attach directly to the bottom of the Enclosure or to the Side Supports. They feature locking brake mechanisms and swivel a full 360 degrees to allow easy movement in any direction. 

Included Options:

Side Supports
The Side Supports are designed with integral support pillars for added strength. Each is engineered to be universal and can be configured to be installed either on the right or left side simply by changing where the Side Support Front Brace is attached. To relocate the Side Support Front Brace, remove the three screws that attach it to the Side Support flip the turn the Side Support upside down and reinstall the Front Brace. Each Side Support includes two adjustable cable paths. The back section where the supports meet the wall has been pre punched with a series of holes to make simple to attach the Side Supports to studs inside the wall that are spaced at the standard of 16” on center.

Lower 45”W Cabinet Kit for 72”W Enclosures
Includes two galvanized Side Support assemblies, a Lower Cabinet assembly with two doors that have stainless steel fronts, one galvanized Lower Cabinet bottom assembly, one galvanized Lower Cabinet Back Panel and two 44.75”W x 14” D shelves that create one 44.75”W x 28”D shelf.  The shelf has three adjustable positions to create an 18” tall space above or below the shelf or two 14” tall spaces. The Cabinet Doors also feature heavy duty magnetic catches and integral door handles that can be secured with any padlock either keyed or combination type (not included). Cabinet interior dimensions measure approximately 30”H x 44”W x 30” D. When the 45” wide Lower Cabinet is installed below one side of a 72”W Enclosure it creates a 26”W open space for a chair on the opposite side.

Fluorescent Strip Lights
Includes an energy efficient, low profile fluorescent strip lights that brightens the interior of the Enclosure without glare. A 42” wide light is installed below the Roll Up Door balancer cover.

18” W Wire Rack Shelf
Includes an 18”W x 8 ½”D wide interior Wire Rack Shelf for small, hard to mount peripheral equipment. Install network switches, routers, KVM switches and modems right on top of the shelf and then drop the cabling right though the shelf at any point.  The Inner Rear Panel of all Enclosures is pre drilled to allow industry standard 89D type 12 Port Cat5E patch panels to be mounted horizontally right below the 18” Wire Rack Shelf so that jumper cables can be easily routed up to a network switch that is installed on the shelf above.

Modular Ventilation System with 4 fans
All 72”W x 36”H Enclosures come standard with one Modular Ventilation System that has 4- fans with provision to add four more fans to the existing ventilation system. An additional Modular Ventilation System can be added that can be equipped with up to eight fans for a maximum total of sixteen (16) fans for any 72”W Enclosure. The ventilation systems are designed to pull cooler air in from the lower slotted inlet sections on the sides, then the air flows across the warm equipment and is drawn into the ventilation system near the top, rear center area of the Enclosure by the fans which then exhaust the warmed air out through the top slotted outlet sections.

Interior Side Shelving System
Includes a 26”H interior side mounted Shelving System and an 18”W x 19”D Side Shelf that’s perfect for supporting items such as fax machines and small printers. The vertical position of the shelf is easily adjusted with common tools. The Shelving System and Side Shelf are made of heavy gauge galvanized steel and are installed on the left side of the Enclosure as shipped from the factory, but it can easily be relocated to the right side if desired.

Multiple Outlet Power Strip
Includes a Multiple Outlet Power Strip that is installed across bottom of the Inner Back Panel. Features an all metal housing with several grounded outlets that are spaced far enough apart to easily accommodate large power transformers. Includes a circuit breaker, mounting tabs on each end and 6 foot grounded power cord.

Cable Management Rings
Includes multiple large cable management rings that support cabling and power cords vertically and horizontally on the Inner Back Panel. They are molded of high impact plastic into a sturdy “C” shape design that incorporates a resilient spring opening on one side. These cable management rings make it easy to organize all of the cabling and power cords. The rings can be easily removed and relocated to any of many other predrilled vertical or horizontal positions if needed.

A VESA Monitor Mount for interior pillars
Includes a 75/100 mm VESA Monitor Mounting Kit that can be installed on the support pillars at either the right or left sides at either the front or rear of the inside of the Enclosure. The mount features two axes of movement that can be adjusted without tools and it can support flat panel monitors up to 24”.

Bin Boxes and Mounting Bars
Includes a number of handy Bin Boxes and Mounting Bars that are great for organizing small items.  (For bin box and mounting bar specifications refer to the product short description) These bins have a built in hanging edge along the back and are molded of high-impact polypropylene. Their sturdy, one-piece construction is water, rust and corrosion-proof and they are unaffected by grease, oils, weak acids or alkalis.  They feature a Curved-bottom hopper front which makes it easy to retrieve small items.  Color varies. Some Bin Box Mounting Bars are pre installed across the rear inner panel at the factory; but they can easily be relocated to multiple predrilled locations on the Inner Rear Panel. Other Bin Box Mounting Bars are attached to the Channel Strut of Side Shelving Systems; the height position of these bars can be easily adjusted if desired.

Write Your Own Review
You're reviewing:Mini Office Enclosure Free Standing 72”W x 36”H w/ 45”W Lower Cabinet
Copyright © 2024 Practical Quality Systems