Fully Articulated Wall Mount KDS Support Package for any VESA Monitor + QSR Controller + QSR Bump Bar

$465.00
In stock
Product Code
90330-QSR
More Information
Product Code 90330-QSR
Availability In Stock
Delivery Time 1-7 Days
Note Product usually ships within 24 hours of payment/order.
  • For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

  • Visit kitchendisplaysystems.com for an easy to understand tutorial that covers all aspects of Kitchen Display Systems knowledge!
  • This mounting package includes the following individual product components which are also available separately: PN 80005, PN 80600-BLK, PN 50050 and PN 50827.
  • This mounting package supports any VESA compatible monitor, a QSR display controller or thin client and a QSR 1000, 4000, 7500 or 9000 bump bar.
  • The screen mounting assembly supports up to 25 pounds of equipment and attaches directly to a wall or other flat vertical surface.
  • The screen mount included in this package allows full articulation of the screen position. A similar package is offered with a mount allows basic adjustability of the screen position.
  • These mounting packages are designed to offer simplified selection of the components needed to support your Kitchen Display System equipment.
  • These packages of components are only a small sample of the many options that are available. Contact our sales team if you would like us to assemble a custom package for you.
  • Purchasing these components as a package automatically qualifies for a discounted price over purchasing the same items separately. This discounted package price cannot be combined with any other discount programs.

Enhanced VESA 75/100mm Pan and Tilt Head with side-to-side tilt adjustment on an Offset Arm Bracket

  • A universal mount that works with any 75mm or 100mm VESA compatible screen.
  • Tightening the 2 four-point knobs applies variable clutching resistance to allow adjustment of the up and down tilt position of the screen. Tighten either of the two 10-32 Phillips head screws adjacent to the four-point knobs to permanently secure the tilt position.
  • Tightening the five- point knob below the Offset bracket applies variable clutching resistance to allow adjustment of the side-to-side pan position of the screen. A 10-32 Phillips head screw in the center of the lower Panning plate can be tightened to permanently secure the pan position.
  • Tightening the three - point knob at the rear center of the VESA mounting plate applies variable resistance to allow adjustment of the side-to-side screen tilt position.
  • Tighten the 10-32 Phillips head screw on the lower Panning plate into one of the holes in the Offset bracket to permanently secure the pan position.

Telescopic Arm Section

  • The overall length of the Telescopic arm section can be adjusted up to 6 inches. To adjust; grasp the inner arm and slightly loosen the three-point knob just until the inner arm can be moved. Pull the inner arm out to extend it or push it in to retract the arm to the desired new length; then retighten the knob to secure the position.

Single Position 25lb Wall Mounting Plate with Integral Standoff bracket, Offset Arm Bracket and Arm

  • The Single Position 25lb Wall Mounting Plate with Integral Standoff bracket supports one arm, allows side to side adjustment of the arm and attaches to any flat, smooth vertical surface
  • Attach the mounting plate to the Wall or other flat vertical surface with appropriate fasteners.
  • The side-to-side pan position resistance is preset at the factory with a 5/16” bolt in the center of the upper standoff plate to allow the arm offset bracket to move freely side to side and should not need adjustment. However, a ½” wrench can be used to adjust the tension on this bolt.
  • To permanently lock the side-to-side position of the Offset Bracket and arm; loosen the 10-32 Phillips head screw on the top of the Standoff bracket, adjust the side-to-side position of the Offset bracket and arm; tighten the screw into one of the holes in the Offset bracket to secure the new position.
  • The Offset Bracket attaches the arm to the Stand Off bracket and allows adjustment of the up and down “Offset angle” of the arm.
  • Adjusting the Up and down position of the arm at the Offset bracket: Remove the 1/4” Wire-Lock Clevis Pin from the Offset Bracket to adjust the up and down position of the arm; then reinsert the pin into one of the holes in the Offset bracket and through the arm to secure the new position.
  • Note that the mounting plate includes slots along the sides so that it can be attached to poles up to 36” in diameter with our optional strapping kit PN 80801 or any other compatible hose clamps.
  • The mounting plate includes multiple slots for cable tie points.

We believe in ethical SEO relevancy; the following section was included to assist the all-knowing algorithms in locating this page; however, some humans like it too. 

  • VESA wall mount, VESA wall mounting bracket, VESA wall mount bracket, Screen wall mount, screen wall mounting bracket, screen wall mount bracket, monitor wall mount, monitor wall mounting bracket.
  • Monitor wall mount bracket, POS terminal wall mount, POS terminal wall mounting bracket, POS terminal wall mount bracket, Point of Sale POS terminal wall mount, Point of Sale terminal wall mounting bracket.
  • Point of Sale terminal wall mount bracket, KDS wall mount, KDS wall mounting bracket, KDS wall mount bracket, Kitchen Display System wall mount, Kitchen Display System wall mounting bracket. Kitchen Display System wall mount bracket, Kitchen production System wall mount, Kitchen Monitor wall mount.
  • Kitchen video wall mount. Touchscreen wall mount, All in One PC wall mount, Healthcare monitor wall mount, Industrial process monitor wall mount, Kiosk wall mount, Office monitor wall mount, manufacturing process monitor wall mount.
  • Industrial computer Enclosure, Industrial computer VESA Mount, Industrial computer, Industrial computer Housing, industrial computer Mounting bracket, Industrial computer Monitor Mount, Thin client Housing.
  • Thin client Enclosure, Mini PC Enclosure, Mini computer Enclosure, Mini computer Housing, Minicomputer Enclosure, Thin client VESA Mount, Mini PC VESA Mount, Mini PC Housing, Mini computer VESA Mount.
  • Mini computer Housing, Minicomputer VESA Mount, Minicomputer Housing, thin client Mounting bracket, Mini PC Mounting bracket, Mini computer Mounting bracket, minicomputer Mounting bracket, Thin client Mount, Mini PC Mount.
  • Mini computer Mount, minicomputer Mount, Thin client Monitor Mount, Mini PC Monitor Mount, Mini computer Monitor Mount, Minicomputer Monitor Mount, Thin client Mounting bracket, Mini PC Mounting bracket.
  • Mini computer Mounting bracket, Minicomputer Mounting bracket, KDS controller Enclosure, KDS controller Housing, KDS controller VESA Mount, KDS controller Mounting bracket, KDS controller Mount, KDS controller Monitor Mount.
  • Kitchen display System controller Enclosure, Kitchen display System controller Housing, Kitchen display System controller VESA Mount, Kitchen display System controller Mounting bracket, Kitchen display System controller Mount.
  • Kitchen display System controller Monitor Mount, LITTLEPCS Enclosure, LITTLEPCS Housing, LITTLEPCS VESA Mount, LITTLEPCS Mounting bracket, LITTLEPCS Mount, LITTLEPCS Monitor Mount, Small Form Factor PCs Enclosure.
  • Small Form Factor PCs Housing, Small Form Factor PCs VESA Mount, Small Form Factor PCs Mounting bracket, Small Form Factor PCs Mount, Small Form Factor PCs Monitor Mount.
Write Your Own Review
You're reviewing:Fully Articulated Wall Mount KDS Support Package for any VESA Monitor + QSR Controller + QSR Bump Bar
Fully Articulated Wall Mount KDS Support Package for any VESA Monitor + QSR Controller + QSR Bump Bar
Copyright © 2024 Practical Quality Systems