Stainless Steel Printer Shelf Edge and Wall Mount

$59.50
In stock
Product Code
50313-SS
Stainless Steel Printer Shelf Edge and Wall Mount is available to buy in increments of 1
More Information
Product Code 50313-SS
Availability In Stock
Delivery Time 1-7 Days
Note Product usually ships within 24 hours of payment/order.
  • For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features Printer Tray PN 50313

  • This Shelf Edge, Countertop or wall mount can be used as a universal mounting bracket for Point of Sale / POS printers in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
  • Designed with pre-punched mounting holes along both sides and the rear section to allow easy attachment to any shelf edge, wall or other flat vertical surface.
  • Supports printers up to 6.5” wide and 10” long and up to 10 lbs.
  • When attaching the mount along the rear section the tilt angle is set at 20 degrees to improve access to the paper feed slot on the top of the printer.
  • Includes a cable path hole on the bottom to allow access to outlets located below the tray and cable tie points at both rear corners.
  • When used with most standard-length printers there is sometimes enough room behind the printer to store the power supply and cords or use the version with the separate storage compartment.
  • Made entirely of brushed stainless steel to resist harsh environments. Stress points are reinforced with tack welds to provide additional reinforcement.

General Features Printer Tray PN 80313

  • This shelf edge or wall mount can be used as a universal mounting bracket for Point of Sale / POS printers in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
  • Designed with pre punched mounting holes along both sides and rear section to allow easy attachment to any shelf edge, wall or other flat vertical surface.
  • Supports printers up to 6.5” wide X 10” long and up to 10 lbs.
  • Incudes a generous sized lower compartment for storing a power supply and any excess cabling.
  • Includes a 1.25” diameter hole in the lower rear center section for cable passage.
  • The tray’s rear end is angled at 20 degrees to improve access to the paper feed slot on the top of the printer.
  • Includes a cable path hole on the bottom to allow access to outlets located below the tray and cable tie points at both rear corners.
  • When used with most standard length printers there is enough room behind the printer to store an extra roll of printer paper.
  • Made entirely of brushed stainless steel to resist harsh environments. Stress points are reinforced with tack welds to provide additional reinforcement.
  • The dimensions of the storage compartment are approximately 1.8“H X 6.3”W X 8.28” D
  • The sides of the front and rear sections of the storage compartment have cut out sections for easy installation of the power supply and cord.

We believe in ethical SEO relevancy; the following section was included to assist the all-knowing algorithms in locating this page; however, some humans like it too. 

  • Printer Countertop bracket, printer Countertop mount, printer Countertop mount bracket, printer Countertop mounting bracket, Printer Countertop Tray, Printer Shelf, Kitchen printer, restaurant printer, POS printer, Point of Sale printer, Epson Printer shelf, Healthcare printer, Industrial printer, ID printer, Office printer, Manufacturing printer.
Write Your Own Review
You're reviewing:Stainless Steel Printer Shelf Edge and Wall Mount
Stainless Steel Printer Shelf Edge and Wall Mount
Copyright © 2024 Practical Quality Systems