Wall Mount with a 7 Axis 26" Extendable Arm and a Biased 75/100mm VESA Screen Pan and Tilt Head

$365.00
In stock
Product Code
80005-3642
More Information
Product Code 80005-3642
Availability In Stock
Delivery Time 1-7 Days
Note Product usually ships within 24 hours of payment/order.
  • For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

  • This wall mount can be used as a universal support system for VESA compatible monitors, touchscreens and terminals for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
  • An innovative set of joint assemblies allow seven axis of position adjustment when attached to a wall or other vertical surface. This assembly is also available in a ceiling mount configuration. (See page 14).
  • In addition to having very flexible articulation this mount also has the key feature of being easily LOCKED in any desired screen position. This ability is VERY important when using touch screen equipment as it PREVENTS the screen from moving away from the user each time a touch is input.
  • This assembly supports up to 25 lbs. It is made from steel and finished with a durable, black, low gloss, micro wrinkle powder coat that resists fingerprints.
  • This mounting package includes the following individual product components PN 67075, PN 67081, PN 67045, PN 50121, PN 50124-26.
  • Visit kitchendisplaysystems.com for a free, easy to understand tutorial that covers all aspects of Kitchen Display Systems knowledge!

Enhanced VESA 75-100mm Pan and Tilt Head with side-to-side tilt adjustment on an Offset Arm Bracket

  • A universal mount that works with any 75mm or 100mm VESA compatible screen.
  • Tightening the two four-point knobs applies variable clutching resistance to allow adjustment of the up and down tilt position of the screen. Tighten either of the two 10-32 Phillips head screws adjacent to the four-point knobs to permanently secure the tilt position.
  • Tightening the five-point knob below the offset bracket applies variable clutching resistance to allow adjustment of the side-to-side pan position of the screen. A 10-32 Phillips head screw in the center of the lower panning plate can be tightened to permanently secure the pan position.
  • Tightening the three-point knob at the rear center of the VESA mounting plate applies variable resistance to allow adjustment of the side-to-side screen tilt position.
  • Tighten the 10-32 Phillips head screw on the lower panning plate into one of the holes in the offset bracket to permanently secure the pan position.
  • The offset bracket attaches the VESA pan and tilt head to the end of the arm and allows adjustment of the up and down “offset angle” of the arm.
  • Adjusting the up and down position of the arm at the offset bracket: Remove the 1/4” wire-lock clevis pin from the offset bracket to adjust the up and down position of the arm, then reinsert the pin into one of the holes in the offset bracket and through the arm to secure the new position.
  • Includes (4) M4 Phillips head screws to attach the VESA mounting plate to the back of the screen.

Telescopic Arm Section

  • The overall length of the Telescopic arm section can be adjusted up to 6 inches. To adjust; grasp the inner arm and slightly loosen the three-point knob just until the inner arm can be moved. Pull the inner arm out to extend it or push it in to retract the arm to the desired new length. Re-tighten the knob to secure the position.

Single Position 25lb Wall Mounting Plate with Integral Standoff bracket, Offset Arm Bracket and Arm

  • The Single Position 25lb Wall Mounting Plate with Integral Standoff bracket supports one arm, allows side to side adjustment of the arm, and attaches to any flat, smooth vertical surface.
  • Attach the mounting plate to a wall or other flat vertical surface with appropriate fasteners.
  • The side-to-side pan position resistance is preset at the factory with a 5/16” bolt in the center of the upper standoff plate allowing the arm offset bracket to move freely side to side and should not need adjustment. However, a ½” wrench can be used to adjust the tension on this bolt.
  • To permanently lock the side-to-side position of the offset bracket and arm: Loosen the 10-32 Phillips head screw on the top of the standoff bracket, adjust the side-to-side position of the offset bracket and arm, tighten the screw into one of the holes in the offset bracket to secure the new position.
  • The offset bracket attaches the arm to the standoff bracket and allows adjustment of the up and down “offset angle” of the arm.
  • Adjusting the up and down position of the arm at the offset bracket: Remove the 1/4” wire-lock clevis pin from the offset bracket to adjust the up and down position of the arm, then reinsert the pin into one of the holes in the offset bracket and through the arm to secure the new position.
  • Note that the mounting plate includes slots along the sides so that it can be attached to poles up to 36” in diameter with our optional strapping kit PN 80801 or any other compatible hose clamps.
  • The mounting plate includes multiple slots for cable tie points.

We believe in ethical SEO relevancy; the following section was included to assist the all-knowing algorithms in locating this page; however, some humans like it too. 

  • Fully articulated VESA wall mount, VESA wall mounting bracket, VESA wall mount bracket, screen wall mount, screen wall mounting bracket, screen wall mount bracket, monitor wall mount, monitor wall mounting bracket.
  • Monitor wall mount bracket, POS terminal wall mount, POS terminal wall mounting bracket, POS terminal wall mount bracket, Point of Sale POS terminal wall mount, Point of Sale terminal wall mounting bracket.
  • Point of Sale terminal wall mount bracket, KDS wall mount, KDS wall mounting bracket, KDS wall mount bracket, Kitchen Display System wall mount, Kitchen Display System wall mounting bracket. Kitchen Display System wall mount bracket, Kitchen production System wall mount, Kitchen Monitor wall mount.
  • Kitchen video wall mount. Touchscreen wall mount, All in One PC wall mount, Healthcare monitor wall mount, Industrial process monitor wall mount, Kiosk wall mount, Office monitor wall mount, manufacturing process monitor wall mount.
Write Your Own Review
You're reviewing:Wall Mount with a 7 Axis 26" Extendable Arm and a Biased 75/100mm VESA Screen Pan and Tilt Head
Wall Mount with a 7 Axis 26" Extendable Arm and a Biased 75/100mm VESA Screen Pan and Tilt Head
Copyright © 2024 Practical Quality Systems