4X4 Clamp on Mount + Adjustable 8” Arm + POS Printer Tray

$385.00
In stock
Product Code
81566
More Information
Product Code 81566
Availability In Stock
Delivery Time 1-7 Days
Note Product usually ships within 24 hours of payment/order.
  • For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

  • This versatile mounting system clamps securely without tools at any point along a vertical 4” square pole with the mounting plate oriented parallel to any of the four sides of a pole.
  • The side brackets of the pole clamping system are hinged at the mounting plate and close around the 4x4 pole; two four point hand knobs are inserted through the rear flanges and tightened to provide the clamping action. The knobs can be replaced with 5/16” X 1” L hex or security head bolts if desired.
  • Self-tapping screws can also be installed into the pole through holes in either of the hinging side brackets to secure the mount permanently and Cut out sections on each of the clamping sides allow the mount to be installed over a standard single gang outlet.
  • The POS printer or Peripheral Equipment Tray measures 6½” W X 10¼”L X 1” D and supports a POS printer, one or more EMV and QR/ Barcode readers, or other small equipment up to 10 pounds.
  • The side to side position of the arm on the mounting plate is adjusted with a 5 point hand knob located on the top of the standoff bracket. The knobs work with rubber washers that are used in the assembly to provide a variable clutching resistance.
  • The tray be rotated 360 degrees around the end of the arm. The side to side pan position of the tray is adjusted with a 5 point hand knob located under the end of the arm. The knob works with a rubber washer that is used in the assembly to provide a variable clutching resistance. A Philips head screw located on the pan plane in the middle of the tray can be tightened to permanently lock the side to side position of the Tray arm on the end of the arm.
  • The tray includes a 1” diameter cable path hole and multiple pairs of small holes to feed cable ties through.
PN 81566 4X4 Clamp on Mount + Adjustable 8” Arm + POS Printer Tray
PN QTY DESCRIPTION
21273 1 4x4 Clamp On Mount + Standoff Bracket Assembly
21241 1 Arm, Adjustable, 8”, Printer and Peripherals Tray Assembly
Write Your Own Review
You're reviewing:4X4 Clamp on Mount + Adjustable 8” Arm + POS Printer Tray
4X4 Clamp on Mount + Adjustable 8” Arm + POS Printer Tray
Copyright © 2024 Practical Quality Systems