4X4 Clamp on Mount + Fully Articulated Arm + POS Printer Tray

$520.00
In stock
Product Code
81569
More Information
Product Code 81569
Availability In Stock
Delivery Time 1-7 Days
Note Product usually ships within 24 hours of payment/order.
  • For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

  • This versatile mounting system clamps securely without tools at any point along a vertical 4” square pole with the mounting plate oriented parallel to any of the four sides of a pole.
  • This assembly supports a POS printer or Peripheral Equipment Tray that measures 6½” W X 10¼”L X 1” D and supports a POS printer or one or more EMV and QR/ Barcode readers or other small equipment up to 10 pounds.
  • The tray is attached to the end of the last arm segment in the three segment arm assembly and can be rotated 360 degrees around the end of the arm. The side to side pan position of the tray is adjusted with a 5 point hand knob located under the end of the last arm segment. The knob works with a rubber washer that is used in the assembly to provide a variable clutching resistance. A Philips head screw located on the pan plane in the middle of the tray can be tightened to permanently lock the side to side position of the Tray.
  • The side brackets of the pole clamping system are hinged at the mounting plate and close around the 4x4 pole; two four point hand knobs are inserted through the rear flanges and tightened to provide the clamping action. The knobs can be replaced with 5/16” X 1” L hex or security head bolts if desired.
  • Self-tapping screws can also be installed into the pole through holes in either of the hinging side brackets to secure the mount permanently. Cut out sections on each of the clamping sides allow the mount to be installed over a standard single gang outlet.
  • The Fully Articulating Arm includes 3 arm segments and is attached to the standoff bracket of the 4X4 clamp on mount assembly.
  • This arm has 200 degrees of side to side, horizontal position adjustment and is adjusted with a 5 point hand knob on the upper standoff bracket. The knob works with a pair of rubber washers that are used in the assembly to provide a variable clutching resistance. A Phillips head screw located on the upper standoff bracket can be tightened to permanently lock the side to side position of the arm.
  • The angles of upper and lower arm segments or “offset brackets” adjust to allow the middle arm section to be extended down and outward a selectable distance out from the channel assembly. Each of the offset brackets has 13 adjustable positions in18 degree increments using lynch pins with spring clip retainers.
  • The tray includes a 1” diameter cable path hole and multiple pairs of small holes to feed cable ties through.
PN 81569 4X4 Clamp on Mount + Fully Articulated Arm + POS Printer Tray
PN QTY DESCRIPTION
21273 1 4x4 Clamp On Mount + Standoff Bracket Assembly
21246 1 Arm, Fully Articulating, Printer Tray Assembly
Write Your Own Review
You're reviewing:4X4 Clamp on Mount + Fully Articulated Arm + POS Printer Tray
4X4 Clamp on Mount + Fully Articulated Arm + POS Printer Tray
Copyright © 2024 Practical Quality Systems