4X4 Clamp on Mount + Fully Articulated, Extendable arm + Enhanced VESA Pan + Tilt Head

$580.00
In stock
Product Code
81571
More Information
Product Code 81571
Availability In Stock
Delivery Time 1-7 Days
Note Product usually ships within 24 hours of payment/order.
  • For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

  • This versatile mounting system clamps securely without tools at any point along a vertical 4” square pole with the mounting plate oriented parallel to any of the four sides of a pole.
  • This assembly supports any 75 or 100mm VESA compatible screen on a pan and tilt head assembly attached to fully articulating arm that locate the back of the screen an adjustable distance and angle out from the surface of the vertical 4x4 pole assembly.
  • The mount Includes 4 EA M4 X 10mm L Phillips head screws to attach the screen to the VESA Pan and Tilt head assembly.
  • The side brackets of the pole clamping system are hinged at the mounting plate and close around the 4x4 pole; two four point hand knobs are inserted through the rear flanges and tightened to provide the clamping action. The knobs can be replaced with 5/16” X 1” L hex or security head bolts if desired and self- tapping screws can also be installed into the pole through holes in either of the hinged side brackets to secure the mount permanently.
  • Cut out sections on each of the clamping sides allow the mount to be installed over a standard single gang outlet.
  • The Fully Articulating Extendable Offset arm includes three arm segments with the upper most section attached to the four standoff brackets on the mounting plate of the 4x4 clamp on mount. This arm has 200 degrees of side to side, horizontal position adjustment on the standoff bracket.
  • The side to side position of the arm can be adjusted within 160 degrees with a 5 point hand knob located on the top of the standoff bracket. The knobs work with rubber washers to provide variable clutching resistance.
  • The angles of upper and lower arm segments or “offset brackets” adjust to allow the middle arm segment to be extended down and outward a selectable distance out from the channel assembly.
  • The middle arm segment of this arm is telescopic and can be extended outward up to 6 inches. The extended position of the arm is adjusted with a 3 point knob on the side of the arm.
PN 81571 4X4 Clamp on Mount + Fully Articulated, Extendable arm + Enhanced VESA Pan + Tilt Head
PN QTY DESCRIPTION
21273 1 4x4 Clamp On Mount + Standoff Bracket Assembly
21249 1 Arm, Extendable, Fully Articulating, Enhanced VESA Pan and Tilt Head Assembly
70006-4pac 1 SCREW, M4-10mm PHILLIPS PAN HEAD
Write Your Own Review
You're reviewing:4X4 Clamp on Mount + Fully Articulated, Extendable arm + Enhanced VESA Pan + Tilt Head
4X4 Clamp on Mount + Fully Articulated, Extendable arm + Enhanced VESA Pan + Tilt Head
Copyright © 2024 Practical Quality Systems