4X4 Clamp on Mount + Fully Articulated, Extendable Arm + POS Printer or Peripherals Tray

$570.00
In stock
Product Code
81573
More Information
Product Code 81573
Availability In Stock
Delivery Time 1-7 Days
Note Product usually ships within 24 hours of payment/order.
  • For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

  • This versatile mounting system clamps securely without tools at any point along a vertical 4” square pole with the mounting plate oriented parallel to any of the four sides of a pole.
  • The side brackets of the pole clamping system are hinged at the mounting plate and close around the 4x4 pole; two four point hand knobs are inserted through the rear flanges and tightened to provide the clamping action. The knobs can be replaced with 5/16” X 1” L hex or security head bolts if desired.
  • Self-tapping screws can also be installed into the pole through holes in either of the hinging side brackets to secure the mount permanently and Cut out sections on each of the clamping sides allow the mount to be installed over a standard single gang outlet.
  • This assembly supports a POS printer or Peripheral Equipment Tray that measures 6½” W X 10¼”L X 1” D and supports a POS printer or one or more EMV and QR/ Barcode readers or other small equipment up to 10 pounds. The tray is attached to the end of the last arm segment in the three segment arm assembly and can be rotated 360 degrees around the end of the arm. The side to side pan position of the tray is adjusted with a 5 point hand knob located under the end of the last arm segment. The knob works with a rubber washer that is used in the assembly to provide a variable clutching resistance. A Philips head screw located on the pan plane in the middle of the tray can be tightened to permanently lock the side to side position of the Tray arm on the end of the arm.
  • The Fully Articulating Extendable Offset arm includes 3 arm segments and can be attached to any of the 4 standoff brackets on the Arm Collar assembly. This arm has 200 degrees of side to side, horizontal position adjustment with the position being adjusted with a 5 point hand knob on the upper standoff bracket. The knob works with a rubber washer that is used in the assembly to provide a variable clutching resistance. A Phillips head screw located on the upper standoff bracket can be tightened to permanently lock the side to side position of the arm.
  • The angles of upper and lower arm segments or “offset brackets” adjust to allow the middle arm segment to be extended down and outward a selectable distance out from the channel assembly. Each of the offset brackets has 13 adjustable positions in18 degree increments using lynch pins with spring clip retainers.
  • The middle arm segment of this arm is telescopic and can be extended outward up to 6 inches. The extended position of the arm is adjusted with a 3 point knob on the side of the arm.
PN 81573 4X4 Clamp on Mount + Fully Articulated, Extendable Arm + POS Printer or Peripherals Tray
PN QTY DESCRIPTION
21273 1 4x4 Clamp On Mount + Standoff Bracket Assembly
21252 1 Arm, Extendable, Fully Articulating, Printer Tray Assembly
Write Your Own Review
You're reviewing:4X4 Clamp on Mount + Fully Articulated, Extendable Arm + POS Printer or Peripherals Tray
4X4 Clamp on Mount + Fully Articulated, Extendable Arm + POS Printer or Peripherals Tray
Copyright © 2024 Practical Quality Systems