4X4 Clamp on Mount +100mm VESA Flat Quick Disconnect

$255.00
In stock
Product Code
81575
More Information
Product Code 81575
Availability In Stock
Delivery Time 1-7 Days
Note Product usually ships within 24 hours of payment/order.
  • For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

  • This versatile mounting system clamps securely without tools at any point along a vertical 4” square pole with the mounting plate oriented parallel to any of the four sides of a pole.
  • This assembly allows any 100mm VESA compatible screen to be attached semi flush to the mounting plate which is raised approximately 2” inches out from the surface of the vertical 4x4 pole assembly when equipped with the quick connect VESA plates.
  • The mount Includes 4 EA M4 X 10mm L Phillips head screws to attach the quick connect VESA mounting plate to the back of the screen.
  • One quick connect VESA plate is attached to the square pattern of four tapped hole on the back of the screen with the mating tab facing downward; the other quick connect VESA plate is attached to the mounting plate with the mating facing upward. When the tabs are aligned correctly with the upper tab slightly above and inside of the lower tab; they can be brought together to interlock.
  • A Phillips head lock screw on the side of the quick connect plates can be tightened to secure the two halves of the mount together semi permanently which prevents the screen from being lifted and removed.
  • The side brackets of the pole clamping system are hinged at the mounting plate and close around the 4x4 pole; two four point hand knobs are inserted through the rear flanges and tightened to provide the clamping action. The knobs can be replaced with 5/16” X 1” L hex or security head bolts if desired.
  • Cut out sections on each of the clamping sides allow the mount to be installed over a standard single gang outlet.
  • Self- tapping screws can also be installed into the pole through holes in either of the hinging side brackets to secure the mount permanently.
PN 81575 4X4 Clamp on Mount +100mm VESA Flat Quick Disconnect
PN QTY DESCRIPTION
21272 1 4x4 Clamp On Mount Assembly
80910-Gal 1 Flat Wall Mount 75/100 VESA (Galvanized)
70020 4 Screw, 10-32 x 1/4" L Phillips Pan Head
Write Your Own Review
You're reviewing:4X4 Clamp on Mount +100mm VESA Flat Quick Disconnect
4X4 Clamp on Mount +100mm VESA Flat Quick Disconnect
Copyright © 2024 Practical Quality Systems