Under Counter Mount with a 3” Riser, an 8” arm, and a Flat Printer Tray

$335.00
In stock
Product Code
80245
Under Counter Mount with a 3” Riser, an 8” arm, and a Flat Printer Tray is available to buy in increments of 1
More Information
Product Code 80245
Availability In Stock
Delivery Time 1-7 Days
Note Product usually ships within 24 hours of payment/order.

General Features

  • Both of these under counter mounts can be used as a universal support system for most standard printers used for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
  • An innovative set of joint assemblies allow two axis of position adjustment on each arm when attached to a wall or other vertical surface.
  • This arm of this assembly supports up to 15 lbs. This assembly is made of steel and is finished with a durable, black, low gloss, micro wrinkle powder coat that resists fingerprints.
  • This mounting package includes the following individual product components PN 50165, PN 50046, PN 67048, PN 67017, 67015, PN 67090.
  • Visit kitchendisplaysystems.com for a free, easy to understand tutorial that covers all aspects of Kitchen Display Systems knowledge!

Flat Printer Tray on an Adjustable Arm

  • A universal mount that works with most POS printers.
  • The interior dimensions of the Flat Printer Tray are 6½” W X 10¼” L X 1” D.
  • Includes a 1¼” diameter hole on one end for routing the power and data cables below the tray if desired.
  • Includes multiple sets of tie point holes for inserting cable ties to secure the power and data cables if desired.
  • Tightening the five- point knob below the end of the Arm applies variable resistance to allow adjustment of the side-to-side pan position of the Tray. A 10-32 Phillips head screw in one of the center holes can be tightened into one of the holes on the end of the arm to permanently secure the side-to-side pan position.

Riser, Riser Cap and Arm

  • The Riser Cap allows an arm to rotate around the top of a Riser assembly.
  • Loosening the three - point knob on the side of the Riser Cap allows adjustment of the side-to-side pan position of the arm around the riser assembly. Tightening the knob locks the position of the arm.
  • The Riser cap incorporates a cable tie point to secure the cables so that they will travel safely as the arm is rotated.
  • The Riser Cap interacts with the Riser Cap Stop on the side of the Riser to prevent the arm from making a full rotation around the riser. Refer to the Riser and mounting plate section for instructions on setting the position of the Riser Cap Stop.

Under counter Mounting Plate with Stand off Bracket, Riser, Riser Cap and Arm

  • The Riser section elevates the arm above the mounting surface and permits the screen pan and tilt head, or printer tray, to travel horizontally allowing a wide range of positioning options.
  • Attach the mounting plate to the underside of the counter top or other flat horizontal surface with appropriate fasteners.
  • Evaluate the side-to-side range of motion of the arm that are attached to the Riser Cap.
  • The Riser Cap Stop prevents the Riser cap and arm from rotating a full 360 degrees around the Riser. It may be advantageous to relocate the stop position to optimize the side-to-side range of motion of the arm for your application.
  • To reset the position of the Riser Cap Stop; Turn the mount so that you can access the bottom of the mounting plate, slightly loosen the 5/16-18 bolt with a ½” wrench, slightly loosen the 10-32 Phillips head riser lock screw on the underside of the mounting plate; carefully rotate the riser to locate the stop at the new desired position; then retighten the bolt and screw.
  • The Riser Cap incorporates a cable tie point to secure the cables so that they will travel safely as the arms are rotated.

We believe in ethical SEO relevancy; the following section was included to assist the all-knowing algorithms in locating this page; however, some humans like it too. 

  • Printer Under counter bracket, printer Under-counter mount, printer Under-counter mount bracket, printer Under-counter mounting bracket, Printer Under-counter Tray, Printer Shelf, Kitchen printer, restaurant printer, POS printer, Point of Sale printer, Epson Printer shelf, Healthcare printer, Industrial printer, ID printer, Office printer, Manufacturing printer.
Write Your Own Review
You're reviewing:Under Counter Mount with a 3” Riser, an 8” arm, and a Flat Printer Tray
Under Counter Mount with a 3” Riser, an 8” arm, and a Flat Printer Tray
Copyright © 2024 Practical Quality Systems