Product Info Sheet
Available In stock
Product Code - 80085
Availability - In stock
Delivery Time - 1-7 Days.
Note: Product usually ships within 24 hours of payment/order.
This counter top or shelf mount can be used as a universal support system for Printers for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
This hardware and bracket assembly supports up to 15lbs.
This assembly is made from steel and is finished with a durable, black, low gloss, micro finish powder coat that resists fingerprints.
Select the Product Info Sheet link at the top of this page for more information.
Single Position 15LB Mounting Plate Features
Attaches to a shelf, counter top or any other flat horizontal surface.
Adjustable 8” Arm Features
The 8” arm can be easily adjusted side to side and locked in any position with a five point hand knob. The position can also be permanently secured by tightening a lock screw.
A pair of thick nitrile washers provide a positive, non slip, clutching grip to insure the arm stays in place.
Riser & Riser Cap Features
The 8” arm supporting the flat printer tray can be easily adjusted side to side and locked in any position with a three point hand knob.
An integral stop feature on the riser and arm can be located at any setting to prevent cable damage when the arm supporting the printer tray is rotated around the riser.
The printer tray can be easily removed from the arm and attached directly to the top of the riser.
The riser cap incorporates a cable tie point to secure cables insuring they will travel safely as the arm is rotated.
A 3”or 6” riser elevates an 8” long arm above the mounting surface and permits the printer tray to travel horizontally allowing a wide range of positioning options.
Please specify a 3" or 6" riser when ordering.
To order this mount with a 3” riser use PN 80085
To order this mount with a 6” riser use PN 80084
Flat Printer Tray Features
The interior dimensions are 6½” wide by 10¼” long by 1” deep.
The side to side (rotation) position can be easily adjusted an locked in any postion with a five point hand knob. The position can also be permanently secured with a lock screw.
Includes multiple tie points for adding cable ties to secure a power supply and any extra cabling.
Optional Adjustable Tilting Printer Tray
The sides of the printer tray adjust without tools to grip the sides of any printer from 5” to 9 ½” wide.
The side to side (rotation) position can be easily adjusted and locked in any position with a five point hand knob. The postion can also be permanently secured with a lock screw
The tilt angle can be easily adjusted up and down and locked in any position with two four point hand knobs.
The printer tray also makes a great telephone mount.
To order this mount with an adjustable tilting printer tray and a 6” riser use PN 80084-300
To order this mount with an adjustable tilting printer tray and a 3” riser use PN 80085-300