My Cart (0 Item) | Sign in
PRACTICAL QUALITY SYSTEMSFast Custom Manufacturing - Nationwide Installation Services
  • Product Images

  • Product Info Sheet

Countertop Fixed Pedestal Mount with one 3” & one 6" Riser, two 8” Arms, one 75/100mm VESA Screen Pan and Tilt Head, and a Flat Printer Tray
$360.00
USD

Available In stock

Countertop Fixed Pedestal Mount with one 3” & one 6" Riser, two 8” Arms, one 75/100mm VESA Screen Pan and Tilt Head, and a Flat Printer Tray is available for purchase in increments of 1
Add To Cart

Product Code - 80088

Availability - In stock

Delivery Time - 1-7 Days.

Note: Product usually ships within 24 hours of payment/order.

Standard Features: Close Description

General Features

  • This Shelf Edge or Countertop mount can be used as a universal support system for and Printer and VESA compatible monitors, touchscreens and terminals for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.

  • This hardware and bracket assembly supports up to 15lbs. on each arm.

 

Mounting Plate Features

  • The three position mounting plate can support 1 or 2 arms and can may be rotated and installed vertically or horizontally to create a wider variety of mounting options.

  • This assembly supports touch screens, terminals or flat panel monitors up to approximately 22” or 15lbs.

  • Attaches to a shelf, counter or any other flat horizontal surface.

 

Riser & Riser Cap Features

  • The 8” arm supporting the screen pan and tilt head can be easily adjusted side to side and locked in any position at the Riser with the three point hand knob.

  • Integral stop details on the riser and arm can be located at any setting to prevent cable damage when the arm supporting the screen or the printer is rotated around the riser.

  • The screen pan and tilt heads include integral stop details that limit a full rotation to the right or left to prevent cable damage.

  • The pan and tilt head or printer can be easily removed from the arm and attached directly to the top of the riser.

  • The riser cap incorporates a cable tie point to secure the cables so that they will travel safely as the arm is rotated.

  • A 3”or 6” riser elevates the 8” arm above the mounting surface and permits the screen pan and tilt head or printer tray to travel horizontally and to allow a wide range of positioning options.

  • Please specify either 3" or 6" riser(s) when ordering.

    • To order this mount with two 6” Riser, use P/N 80086

    • To order this mount with two 3” Riser, use P/N 80087

    • To order this mount with one 3” and one 6” Riser, use P/N 80088

Printer Tray Features

  • The interior dimensions of the Flat Printer Tray are 6½” Wide by 10¼” Long by 1” Deep.

  • The 8” arm supporting the Printer Tray can be easily adjusted side to side and locked in any position at the mounting surface with the five point hand knob; the position can also be permanently secured by tightening the lock screw.

  • The Flat Printer Tray position can be easily adjusted side to side and locked in any position at the end of the arm with the five point hand knob under the tray; the position can also be permanently secured by turning the lock screw on the bottom bracket of the tray into one of the holes in the end of the arm.

  • The printer tray includes multiple tie points form adding cable ties to secure the extra cabling and power supply.

  • The positions of the 8” arms adjust without tools to permit the flat printer tray and pan and tilt head to travel horizontally, allowing a range of positioning options.

 

Standard Pan and Tilt Head Features

  • This assembly includes a 75/100mm VESA compatible screen pan and tilt head.  If your assembly includes an adaptor plate for a proprietary screen type; please refer to the pages that include information specific to that application.

  • The screen Pan Position can be easily adjusted side to side and locked in any position with the five point hand knob. The pan position can also be permanently secured by tightening the lock screw in the base of the head to secure it into one of the holes in the round plate on the end of the arm.

  • The screen Tilt Position can be easily adjusted up and down and locked in any position with the two four point hand knobs. The tilt position can also be permanently secured by tightening the lock screws on the sides of the head to secure it into one of the holes in the sides of the base bracket.

  • Thick Nitrile rubber washers provide an adjustable clutching action that secures the up and down tilt and side to side pan position of the head.

Optional Adjustable Tilting Printer Tray Features

  • The sides of the printer tray adjust without tools to grip the sides of any printer from 5” to 9 ½” wide.

  • The tilting printer tray position can be easily adjusted side to side and locked in any position at the end of the arm with the five point hand knob under the tray.

  • The Tilt angle of the Printer Tray can be easily adjusted up and down and locked in any position with the two four point hand knobs on the sides of the tray.

  • The tilting printer tray printer tray includes multiple tie points form adding cable ties to secure the extra cabling and power supply.

  • The tilting printer tray also makes a great telephone mount.

  • Add an optional second arm with a screen pan and tilt head to support a terminal or screen right next to the printer for a basic kiosk solution.

  • To order the adjustable printer tray with two 6” Risers use P/N: 80086-300

  • To order the adjustable printer tray with two 3” Risers use P/N: 80087-300

  • To order the adjustable printer tray with one 6” Riser & one 3” Riser use P/N: 80088-300

Payments Methods
payment1 payment2 payment3 payment4 payment5
Need any help? Contact Us
Add To Cart