Product Info Sheet
Available In stock
Product Code - 80620
Availability - In stock
Delivery Time - 1-7 Days.
Note: Product usually ships within 24 hours of payment/order.
This Shelf Edge or Countertop mount can be used as a universal support system for VESA compatible monitors, touchscreens and terminals for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
This hardware and bracket assembly supports up to 20 lbs.
Mounting Plate Features
Can be placed directly on a counter top, shelf or any other flat horizontal surface.
The 10 inch diameter base makes the systems very stable and only uses a small amount of valuable counter top space.
The plate has 3 mounting locations for the riser or tilt head attachment.
A 3”or 6” riser elevates the pan and tilt head above the mounting surface and permits the screen to travel horizontally and to allow a wide range of positioning options.
Please specify either 3", 6", or no riser(s) when ordering:
To order this mount with one 3” Riser, use P/N 80620
To order this mount with one 6” Riser, use P/N 80621
To order this mount without a Riser, use P/N 80622
Standard Pan and Tilt Head Features
This assembly includes a 75/100mm VESA compatible screen pan and tilt head. If your assembly includes an adaptor plate for a proprietary screen type; please refer to the pages that include information specific to that application.
The screen Pan Position can be easily adjusted side to side and locked in any position with the five point hand knob. The pan position can also be permanently secured by tightening the lock screw in the base of the head to secure it into one of the holes in the round plate on the end of the arm.
The screen Tilt Position can be easily adjusted up and down and locked in any position with the two four point hand knobs. The tilt position can also be permanently secured by tightening the lock screws on the sides of the head to secure it into one of the holes in the sides of the base bracket.
Thick Nitrile rubber washers provide an adjustable clutching action that secures the up and down tilt and side to side pan position of the head.