Fixed counter top stand for the Ingenico IPP300 series EMV reader

$65.00
In stock
Product Code
80612
More Information
Product Code 80612
Availability In Stock
Delivery Time 1-7 Days
Note Product usually ships within 24 hours of payment/order.
  • For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

  • This counter top stand supports any Ingenico IPP300 series smart EMV reader terminal (not included).

  • Made from 12 gauge steel and finished with a durable, black, low gloss, micro wrinkle powder coat that resists fingerprints.

  • The EMV reader is inclined at a 15 degree angle relative to the counter top.

  • The card slot on the front of the reader is positioned 3-5/8” above the counter top.

Base Plate Features

  • The stand can be placed directly on a counter top, shelf or any other flat, horizontal surface.

  • The heavy 12 gauge steel base makes the system very stable and only uses a small amount of valuable counter top space. Anti-slip rubber pads on the bottom of the base prevent sliding.

  • Screws can be installed through four holes in the base to permanently attach it to the mounting surface.

  • Upturned sides prevent the reader from moving side to side.

  • The Ingenico IPP300 series EMV reader terminal is secured to the mount with two incuded locking screws; 

    (1) #8-32 X 1/4” long phillips head screw is inserted into the "K" slot of the terminal. Note that a security type screw (not included) can be used here if desired.

    (1) M2.5 X 12MM long phillips head screw is inserted through a hole in the bottom of the terminal and into a threaded hole in the bottom of the terminal.

Write Your Own Review
You're reviewing:Fixed counter top stand for the Ingenico IPP300 series EMV reader
Fixed counter top stand for the Ingenico IPP300 series EMV reader
Copyright © 2024 Practical Quality Systems