Product Info Sheet
Available In stock
Product Code - 80402-SS
Availability - In stock
Delivery Time - 1-7 Days.
Note: Product usually ships within 24 hours of payment/order.
Enclosure supports IBM 4838-310 Anyplace Kiosk System Unit 15-inch Models 135, 1Z5, E35, EZ5, W5D, W5Z ; Width 15.0 in (380mm) x Depth 2.8 in (72mm) x Height: 14.0 in (355mm)
Meets NEMA Type 2 rating- Enclosures constructed for indoor use to provide a degree of protection to personnel against access to hazardous parts; to provide a degree of protection of the equipment inside the enclosure against ingress of solid foreign objects (falling dirt); and to provide a degree of protection with respect to harmful effects on the equipment due to the ingress of water (dripping and light splashing).
Includes an active ventilation system to maintain air flow and reduce condensation.
No modification to the terminal’s power cables, associated hardware or to the terminal itself is required for installation.
Two sets of upper and lower locking plates adjust with a Phillips screw driver to secure the terminal and hold it firmly against the touch screen sealing gasket.
A heavy duty hinged back panel opens without tools and allows full access to the interior without removing the enclosure from the mounting system.
A small swivel-open door on the bottom front of the enclosure allows easy access to the power button, brightness controls and USB port.
When the top cover is closed the rear vent section allows for convenient and concealable cable routing.
Downward facing Louvers are located over the terminals speakers to keep falling liquids and dust from entering while allowing sound to get out.
Close fitting neoprene gaskets surround the entire edge of the terminal’s screen, speakers and indicator lights to seal it against liquid entry.
Includes an internal mounting bracket for the terminal’s Power Supply that doubles as a handle to help support the terminal during installation into the enclosure.
Includes an internal three outlet power strip with 9’ grounded cord.
To order this enclosure in hrome metallic powder coated steel finish use P/N 80402-CH.
External optional attachment points for:
Bar Code Scanner which would mount to the underside of the enclosure and;
Magnetic Strip Reader mounting bar attaches to the right hand side of the enclosure.