Product Info Sheet
Available In stock
Product Code - 80085-300
Availability - In stock
Delivery Time - 1-7 Days.
Note: Product usually ships within 24 hours of payment/order.
This assembly supports up to 15 lbs.
Mounting Plate Features
The single position mounting plate may be rotated and installed vertically or horizontally to create a wider variety of mounting options.
Attaches to a shelf, counter top or any other flat horizontal surface.
Adjustable Arm Features
The 8” arm can be easily adjusted side to side and locked in any position at the mounting surface with the five point hand knob; the position can also be permanently secured by tightening the lock screw.
Riser & Riser Cap Features
The 8” arm supporting the screen pan and tilt head can be easily adjusted side to side and locked in any position at the Riser with the three point hand knob.
Integral stop details on the riser and arm can be located at any setting to prevent cable damage when the arm supporting the screen or the printer is rotated around the riser.
The screen pan and tilt heads include integral stop details that limit a full rotation to the right or left to prevent cable damage.
The pan and tilt head or printer can be easily removed from the arm and attached directly to the top of the riser.
The riser cap incorporates a cable tie point to secure the cables so that they will travel safely as the arm is rotated.
A 3”or 6” riser elevates the 8” arm above the mounting surface and permits the screen pan and tilt head or printer tray to travel horizontally and to allow a wide range of positioning options.
Please specify either 3" or 6" riser(s) when ordering.
To order the adjustable printer tray with two 6” Riser, use P/N 80084-300
To order the adjustable printer tray with two 3” Riser, use P/N 80085-300
Printer Tray Features
The sides of the printer tray adjust without tools to grip the sides of any printer from 5” to 9 ½” wide.
The tilting printer tray position can be easily adjusted side to side and locked in any position at the end of the arm with the five point hand knob under the tray.
The Tilt angle of the Printer Tray can be easily adjusted up and down and locked in any position with the two four point hand knobs on the sides of the tray.
The tilting printer tray printer tray includes multiple tie points form adding cable ties to secure the extra cabling and power supply.
The tilting printer tray also makes a great telephone mount.
Add an optional second arm with a screen pan and tilt head to support a terminal or screen right next to the printer for a basic kiosk solution.