My Cart (0 Item) | Sign in
PRACTICAL QUALITY SYSTEMSFast Custom Manufacturing - Nationwide Installation Services
  • Product Images

  • Product Info Sheet

  • Product Drawings

Pedestal Series 2 Mount 12" Tube with two Extendable Arms, one 75/100mm VESA Screen Pan and Tilt Heads, and a Tilting Universal Printer Mounting Tray
$675.00
USD

Available In stock

Pedestal Series 2 Mount 12" Tube with two Extendable Arms, one 75/100mm VESA Screen Pan and Tilt Heads, and a Tilting Universal Printer Mounting Tray is available for purchase in increments of 1
Add To Cart

Product Code - 80150

Availability - In stock

Delivery Time - 1-7 Days.

Note: Product usually ships within 24 hours of payment/order.

Standard Features: Close Description

General Features

  • This Counter top mount can be used as a universal support system for a printer and a VESA compatible monitor, touchscreen and terminal for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.

  • This hardware and bracket assembly supports up to 20lb on each arm.

  • Our Pedestal System (1 screen pan and tilt head and Universal Printer Mounting Tray) is a total mounting solution for all of your point of sale (POS) equipment designed to maximize use of the available counter top space. With this system you can now have a complete terminal and all peripheral equipment supported above only six square inches of counter top space. 

  • The center pedestal section is hollow to permit all of the associated cabling to be routed vertically within it and it features an opening along its entire length. This feature allows the associated cabling to enter at any point along the pedestal and then it can exit at the base from the side or straight out through the bottom of the base.

Adjustable Arm Features

  • The supporting arms can rotate 360° around the pedestal and they can be raised and lowered to be locked down in any position along its entire height. The supporting arms are also telescopic and can extend out from 5” to 10” and will support up to thirty pounds each.

  • The arm can be adjusted side to side and locked in any position at the mounting surface with the hand knob; the position can also be permanently secured by tightening the lock screw so that it indexes into any one of the position locking holes.

  • The arm length can be adjusted by loosening the three point hand knob on the side of the middle of the arm.

Standard Pan and Tilt Head Features

  • This assembly includes a 75/100mm VESA compatible screen pan and tilt head.  If your assembly includes an adaptor plate for a proprietary screen type; please refer to the pages that include information specific to that application.

  • The screen Pan Position can be easily adjusted side to side and locked in any position with the five point hand knob. The pan position can also be permanently secured by tightening the lock screw in the base of the head to secure it into one of the holes in the round plate on the end of the arm.

  • The screen Tilt Position can be easily adjusted up and down and locked in any position with the two four point hand knobs. The tilt position can also be permanently secured by tightening the lock screws on the sides of the head to secure it into one of the holes in the sides of the base bracket.

  • Thick Nitrile rubber washers provide an adjustable clutching action that secures the up and down tilt and side to side pan position of the head.

Adjustable Tilting Printer Tray Features

  • The 8” arm supporting the Printer Tray can be easily adjusted side to side and locked in any position at the mounting surface with the five point hand knob; the position can also be permanently secured by tightening the lock screw.

  • The tilting printer tray position can be easily adjusted side to side and locked in any position at the end of the arm with the five point hand knob under the tray.

  • The Tilt angle of the Printer Tray can be easily adjusted up and down and locked in any position with the two four point hand knobs on the sides of the tray.

  • The tilting printer tray printer tray includes multiple tie points form adding cable ties to secure the extra cabling and power supply.

  • The tilting printer tray also makes a great telephone mount.

  • Add an optional second arm with a screen pan and tilt head to support a terminal or screen right next to the printer for a basic kiosk solution.

Additional Features

  • Our optional Cash Drawer Pedestal Mounting Base (PN 50033) option uses a standard cash drawer as a base for the PED 1 system. With this solution, no tools are needed for installation and no fasteners are installed into the counter top.

  • The top cap of the pedestal permits the mounting of pole displays or signage. 

  • Center sections are also available in 18 and 24 inch lengths. Longer custom lengths can also be ordered as needed.

  • Additional arms, printer mounting trays or pan and tilt heads can also be added to the assembly. 

  • It is even possible to extend the center section from floor to ceiling to create a freestanding solution to support multiple terminals, printers and cash drawers.

Payments Methods
payment1 payment2 payment3 payment4 payment5
Need any help? Contact Us
Add To Cart