Installing a POS terminal and/or a printer on a counter top or other horizontal surface |
|
|
 |
|
|
The Mounting Solutions Tutorial on this page presents our UVHM products that are configured with “Pedestal” mounts. These products are used when mounting flat panel monitors, touch screens, Point of Sale terminals, or printers on a pedestal detail which raises the equipment above a countertop or any other flat horizontal surface.
The following group of products is part of our UVHM-FM (Flat Mount) series. These products have a single arm which pivots side to side on top of a “Riser” detail which elevates the arm 3” or 6” above the mounting plate. A “Tilt Head” is attached to the end of the arm which permits both up and down and side to side positioning of the screen or printer.
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
UVHM-FM-UPMT PN GROUP 80084 TO 80085 |
 |
A pedestal mounting system with a 3" or 6" riser, an 8" arm and a universal printer mounting tray
More info... |
| |
|
|
|
| |
|
|
|
|
UVHM-FM-VESA PN GROUP 80080 TO 80081 |
 |
A pedestal mounting system with a 3" or 6" riser, one 8" arm and a VESA tilt head
More info... |
| |
|
|
|
| |
|
|
|
|
UVHM-FM-CF PN GROUP 80082 TO 80083 |
 |
A pedestal mounting system with a 3"or 6" riser, one 8" arm and a Custom Fit tilt head
More info... |
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
|
|
|
|
The UVHM-FM assemblies below have two arms which pivot side to side on top of a
“Riser” detail which elevates the arms 3” or 6” above the mounting plate. Each arm
has a “Tilt Head” attached to the end which permits both up and down and side to
side positioning of the screen or printer.
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
UVHM-FM-VESA-UPMT PN GROUP 80086 TO 80088 |
 |
A pedestal mounting system with two 3"or 6" risers, two 8" arms, a VESA tilt head and a universal printer mounting tray
More info... |
| |
|
|
|
| |
|
|
|
|
UVHM-FM-CF-UPMT PN GROUP 80089 TO 80091 |
 |
A pedestal mounting system with two 3"or 6" risers, two 8" arms, a Custom Fit tilt head and a universal printer mounting tray
More info... |
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
|
|
|
|
The PED-1 is our larger “Pedestal” system that supports two, four, or more
extendable arms to support multiple pieces of equipment while only using 6” of
countertop space. All of the arms can be rotated 360° around the pedestal as well as
raised and lowered and then locked down in any position along its entire height.
Each PED-1 has a “Tilt Head” attached to the end of the arm which permits both up
and down and side to side positioning of the screen or printer. Our optional CDPMB
(Cash Drawer Pedestal Mounting Base) uses a standard cash drawer as a base for
the PED-1 system. With this solution, no tools are needed for installation, and no
fasteners need to be installed into the countertop.
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
PED1 PN 80150 |
 |
A multi armed system that supports the maximum amount of equipment in a minimum amount of space.
More info... |
| |
|
|
|
| |
|
|
|
| |
|
|
