Product Info Sheet
Available In stock
Product Code - 80978
Availability - In stock
Delivery Time - 1-7 Days.
Note: Product usually ships within 24 hours of payment/order.
The assembly supports a Zebra Motorola Symbol DS9208 Bar Code Scanner and allows full function of the scanner’s integral five position indexed tilt feature.
The height of the scanner mounting plate adjusts from 6 3/4" to 11 5/8” as measured from the counter top to the base of the scanner.
The height of the scanner mounting plate is easily adjusted and locked into any desired position with a three pointed hand knob located on the back of the stand. The knob is permanently retained with a lock nut.
The side to side position of the scanner mounting plate is easily adjusted to pan 90 degrees to the left or right side. The desired scanner side to side position is easily secured with a three pointed hand knob located on the underside of the top of the stand.
With the scanner mounting plate adjusted to its lowest position; the base of the scanner is placed just above the top rear of an Epson TM T88V printer. With the scanner mounting plate adjusted to its highest position; there is plenty of room to swing open the printer paper access door on the top of the Epson TM T88V printer.
The scanner mounting plate uses the same quarter turn, quick disconnect key feature as found on the bottom of the DS9208 scanner.
The scanner mounting plate includes a small thumbscrew to provide a tool less method of securing the scanner to the mounting plate.
The rear of the scanner mounting plate includes a ¾” DIA cable path opening for routing the scanner connecting cable. The scanner height adjustment plate includes two tie points to secure the connecting cable to the plate.
The base plate can support the assembly in a standalone application and is also large enough to support the Epson TM T88V and other printers installed directly on top of the pallet with ample clearance to accommodate the large DB25 connector found on the rear of some models.
The base plate includes multiple low profile non slip domed feet to slightly raise the base plate above any liquid spillage on the counter top.
The stand can be configured in either forward and reverse configurations without tools.