Product Info Sheet
Available In stock
Product Code - 80241
Availability - In stock
Delivery Time - 1-7 Days.
Note: Product usually ships within 24 hours of payment/order.
This assembly supports up to 15 lbs.
Mounting Plate Features
The under counter mounting plate permits attachment of a second optional arm and a variety of different pan and tilt heads to support any touch screen, terminal or flat panel monitor right next to the printer.
Attaches underneath of a counter top, a shelf or any other flat horizontal surface.
Adjustable Arm Features
Riser & Riser Cap Features
The 8” arm supporting the screen pan and tilt head can be easily adjusted side to side and locked in any position at the Riser with the three point hand knob.
Integral stop details on the riser and arm can be located at any setting to prevent cable damage when the arm supporting the screen or the printer is rotated around the riser.
The screen pan and tilt heads include integral stop details that limit a full rotation to the right or left to prevent cable damage.
The pan and tilt head or printer can be easily removed from the arm and attached directly to the top of the riser.
The riser cap incorporates a cable tie point to secure the cables so that they will travel safely as the arm is rotated.
A 3”or 6” riser elevates the 8” arm above the mounting surface and permits the screen pan and tilt head or printer tray to travel horizontally and to allow a wide range of positioning options.
Please specify either 3" or 6" riser(s) when ordering.
To order this mount with one 6” Riser, use P/N 80240
To order this mount with one 3” Riser, use P/N 80241
Pan and Tilt Head Features
This assembly includes a 75/100mm VESA compatible screen pan and tilt head. If your assembly includes a screen pan and tilt head equipped with an adaptor plate for a proprietary screen type; please refer to the pages that include information specific to that application.
The screen Pan and Tilt Head can be easily adjusted side to side or up and down and locked in any position with the four and five point hand knobs; the positions can also be permanently secured by tightening the lock screws.