My Cart (0 Item) | Sign in
PRACTICAL QUALITY SYSTEMSFast Custom Manufacturing - Nationwide Installation Services
  • Product Images

  • Product Info Sheet

Under Counter Mount with two 3” Risers, two 8” Arms, a 75/100mm VESA Screen Pan and Tilt Head, and a Flat Printer Tray
$395.00
USD

Available In stock

Under Counter Mount with two 3” Risers, two 8” Arms, a 75/100mm VESA Screen Pan and Tilt Head, and a Flat Printer Tray is available for purchase in increments of 1
Add To Cart

Product Code - 80247

Availability - In stock

Delivery Time - 1-7 Days.

Note: Product usually ships within 24 hours of payment/order.

Standard Features: Close Description

General Features

  • This under counter top or shelf edge mount can be used as a universal support system for a printer and a VESA compatible monitor, touchscreen or terminal for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.

  • Provides a wide range of placement adjustability.

  • This hardware and bracket assembly supports up to 15lbs on each arm.

  • Mounting assembly is made from steel and finished with a durable, black, low gloss, micro wrinkle powder coat that resists finger prints.

  • Select the Product Info Sheet Link at the top of this page for detailed information.

Under Counter Mounting Plate Features

  • Attaches under a counter top, shelf or any flat horizontal surface. Often used when mounting to a top surface is not desired.

  • Provides several options for attaching various PQS mounting systems. This configuration uses two support brackets to attach the risers.

Riser and Riser Cap Features

  • A 3” or 6” riser elevates an 8” long arm above the mounting surface and permits the display screen and printer to rotate horizontally allowing a wide range of positioning options.

  • An integral stop feature on each riser can be set at any location to prevent cable damage when the arm supporting the display screen or printer is rotated around the riser.

  • The riser cap provides a cable tie point for securing any cables. This feature insures the cables will travel safely as the arm is rotated

  • The 8” arm supporting the display screen pan and tilt head can be easily rotated and locked in any position with a three point hand knob.

  • The 8” arm supporting the printer tray can be easily rotated and locked in any position with a three point hand knob.

  • The pan and tilt head or printer tray can be easily removed from the arm and attached directly to the top of the riser.

  • Please specify a 3” or 6” riser when ordering.

  • To order the adjustable printer tray with two 3” risers use PN 80247

  • To order the adjustable printer tray with two 6” risers use PN 80246

  • To order the adjustable printer tray with one 3” riser and one 6” riser use PN 80248

8” Arm Features

  • One end attaches to a riser cap assembly providing an 8” long extension.

  • The other end attaches to a display screen pan and tilt head or printer tray allowing 360° rotation which can be locked in any position with a five point hand knob. The position can also be permanently secured with a lock screw (included).

  • The five point hand knob compresses a thick, nitrile, rubber washer to provide a positive, non slip, clutching grip.

Standard Pan and Tilt Head Features

  • This assembly includes a 75/100mm VESA compatible screen pan and tilt head.

  • The pan position, or roatation, can be easily rotated side to side and secured in any position with a five point hand knob. The pan position can also be permanently secured by tightening a lock screw.

  • The tilt position can be easily adjusted up and down and secured in any position with two four point hand knobs. The tilt position can also be permanently secured with two lock screws.

  • Thick nitrile rubber washers provide a positive, non slip, clutching grip to insure the pan and tilt head stays in position.

Flat Printer Tray Features

  • The interior dimensions of the Flat Printer Tray are 6½” wide by 10¼” long by 1” deep.

  • Rotates around the end of the 8” arm. The rotation position can be easily adjusted and locked in any position with a five point hand knob. The position can also be permanently secured with a lock screw (included).

  • Includes multiple tie points for adding cable ties to secure a power supply and any extra cabling.

Optional Adjustable Tilting Printer Mounting Tray

  • The sides of the printer tray adjust without tools to grip the sides of any printer from 5” to 9 ½” wide.

  • Rotates around the end of the 8” arm. The rotation position can be easily adjusted and locked in any position with a five point hand knob. The position can also be permanently secured with a lock screw (included).

  • The tilt angle of the printer tray can be easily adjusted up and down and locked in any position with two four point hand knobs.

  • Includes multiple tie points for adding cable ties to secure a power supply and any extra cabling.

  • The tilting printer tray also makes a great telephone mount.

  • To order this mount with an adjustable printer tray and two 3” risers use PN 80247-300

  • To order this mount with an adjustable printer tray and two 6” risers use PN 80246-300

  • To order this mount with an adjustable printer tray and one 3” riser and one 6” riser use PN 80248-300

Payments Methods
payment1 payment2 payment3 payment4 payment5
Need any help? Contact Us
Add To Cart