Product Info Sheet
Available In stock
Product Code - 80025
Availability - In stock
Delivery Time - 1-7 Days.
Note: Product usually ships within 24 hours of payment/order.
This wall mount can be used as a universal support system for Printers for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
All wall mounting systems can be ordered with an optional Stud Bridge Mounting Plate (PN 50546) that can support multiple mounts and attaches across a pair of vertical wall studs spaced at 16" on center.
This hardware and bracket assembly supports up to 15 lbs.
Single Position 15lb Plate Features
The single position mounting plate may be rotated and installed vertically or horizontally to create a wide variety of mounting options.
This assembly supports VESA compatible monitors, touchscreens and terminals for Point of Sale / POS, Kitchen Display systems / KDS up to approximately 22” or 15lbs.
The mounting plate attaches directly to a wall or any other flat vertical surface.
The single position mounting plate can also be attached to a pole up to 6” in diameter with an optional strapping kit PQS PN 80801 or any compatible hose clamps.
Riser & Riser Cap Features
The 8” arm supporting the screen pan and tilt head can be easily adjusted side to side and locked in any position at the Riser with the three point hand knob.
Integral stop details on the riser and arm can be located at any setting to prevent cable damage when the arm supporting the screen or the printer is rotated around the riser.
The screen pan and tilt heads include integral stop details that limit a full rotation to the right or left to prevent cable damage.
The pan and tilt head or printer can be easily removed from the arm and attached directly to the top of the riser.
The riser cap incorporates a cable tie point to secure the cables so that they will travel safely as the arm is rotated.
A 3”or 6” riser elevates the 8” arm above the mounting surface and permits the screen pan and tilt head or printer tray to travel horizontally and to allow a wide range of positioning options.
Please specify either 3" or 6" riser(s) when ordering.
To order this mount with two 6” risers, use PN 80024
To order this mount with two 3” risers, use PN 80025
Flat Printer Tray Features
The interior dimensions of the Flat Printer Tray are 6½” Wide by 10¼” Long by 1” Deep.
The 8” arm supporting the Printer Tray can be easily adjusted side to side and locked in any position at the mounting surface with the five point hand knob. The position can also be permanently secured by tightening the lock screw.
The Flat Printer Tray position can be easily adjusted side to side and locked in any position at the end of the arm with the five point hand knob under the tray. The position can also be permanently secured by turning the lock screw on the bottom bracket of the tray into one of the holes in the end of the arm.
The printer tray includes multiple tie points form adding cable ties to secure the extra cabling and power supply.
The sides of the printer tray adjust without tools to grip the sides of any printer from 5” to 9 ½” wide.
The tilting printer tray position can be easily adjusted side to side and locked in any position at the end of the arm with the five point hand knob under the tray.
The Tilt angle of the Printer Tray can be easily adjusted up and down and locked in any position with the two four point hand knobs on the sides of the tray.
The tilting printer tray printer tray includes multiple tie points form adding cable ties to secure the extra cabling and power supply.
The tilting printer tray also makes a great telephone mount.
Add an optional second arm with a screen pan and tilt head to support a terminal or screen right next to the printer for a basic kiosk solution.
To order the adjustable printer tray with a 6” riser use PN 80024-300
To order the adjustable printer tray with a 3” riser use PN 80025-300