My Cart (0 Item) | Sign in
PRACTICAL QUALITY SYSTEMSFast Custom Manufacturing - Nationwide Installation Services
  • Product Images

  • Product Info Sheet

  • Product Drawings

Wall Mount with a 6” Riser, 8” Arm, & a Tilting Universal Printer Mounting Tray
$375.00
USD

Available In stock

Wall Mount with a 6” Riser, 8” Arm, & a Tilting Universal Printer Mounting Tray is available for purchase in increments of 1
Add To Cart

Product Code - 80024-300

Availability - In stock

Delivery Time - 1-7 Days.

Note: Product usually ships within 24 hours of payment/order.

Standard Features: Close Description

General Features

  • This assembly supports up to 15 lbs.

  • All wall mountable assemblies can be ordered with an optional Stud Bridge Mounting Plate (PN 50486) that supports up to three arms and attaches to wall studs spaced at 16" on center.

Mounting Plate Features

  • The single position mounting plate may be rotated and installed vertically or horizontally to create a wider variety of mounting options.

  • Attaches to a wall or any other flat vertical surface.

  • The single position mounting plate can be attached to a pole up to 6” in diameter with an optional strapping kit P/N: 80801

Adjustable Arm Features

  • The 8” arm can be easily adjusted side to side and locked in any position at the mounting surface with the five point hand knob; the position can also be permanently secured by tightening the lock screw.

Riser & Riser Cap Features

  • The 8” arm supporting the screen pan and tilt head can be easily adjusted side to side and locked in any position at the Riser with the three point hand knob.

  • Integral stop details on the riser and arm can be located at any setting to prevent cable damage when the arm supporting the screen or the printer is rotated around the riser.

  • The screen pan and tilt heads include integral stop details that limit a full rotation to the right or left to prevent cable damage.

  • The pan and tilt head or printer can be easily removed from the arm and attached directly to the top of the riser.

  • The riser cap incorporates a cable tie point to secure the cables so that they will travel safely as the arm is rotated.

  • A 3”or 6” riser elevates the 8” arm above the mounting surface and permits the screen pan and tilt head or printer tray to travel horizontally and to allow a wide range of positioning options.

  • Please specify either 3" or 6" riser(s) when ordering.

    • To order this mount with two 6” Riser, use P/N 80024-300

    • To order this mount with two 3” Riser, use P/N 80025-300

Printer Tray Features

  • The 8” arm supporting the Printer Tray can be easily adjusted side to side and locked in any position at the mounting surface with the five point hand knob; the position can also be permanently secured by tightening the lock screw.

  • The printer tray includes multiple tie points form adding cable ties to secure the extra cabling and power supply.

  • The printer tray can be rotated and locked into position without tools.

  • The sides of the printer tray adjust without tools to grip the sides of any printer from 5” to 9 ½” wide.

  • The tilting printer tray position can be easily adjusted side to side and locked in any position at the end of the arm with the five point hand knob under the tray.

  • The Tilt angle of the Printer Tray can be easily adjusted up and down and locked in any position with the two four point hand knobs on the sides of the tray.

  • The tilting printer tray printer tray includes multiple tie points form adding cable ties to secure the extra cabling and power supply.

  • The tilting printer tray also makes a great telephone mount.

  • Add an optional second arm with a screen pan and tilt head to support a terminal or screen right next to the printer for a basic kiosk solution. 

Payments Methods
payment1 payment2 payment3 payment4 payment5
Need any help? Contact Us
Add To Cart