Product Info Sheet
Available In stock
Product Code - 80002-300
Availability - In stock
Delivery Time - 1-7 Days.
Note: Product usually ships within 24 hours of payment/order.
This wall mount can be used as a universal support system for Printers for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
All wall mounting systems can be ordered with an optional stud bridge mounting plate PN 50546 that can support multiple mounts and attaches across a pair of vertical wall studs spaced at 16" on center.
This hardware and bracket assembly supports up to 15 lbs.
This hardware and bracket assembly are made from steel and finished with a durable, black, low gloss, micro finish powder coat that resists fingerprints.
Select the Product Info Sheet link at the top of this page for detailed information.
Single Position 15LB Mounting Plate Features
The single position mounting plate may be rotated and installed vertically or horizontally to create a wider variety of mounting options.
This assembly supports VESA compatible monitors, touchscreens and terminals for Point of Sale / POS, Kitchen Display systems / KDS up to approximately 22” or 15lbs.
The mounting plate attaches directly to a wall or any other flat vertical surface.
The single position mounting plate can also be attached to a pole up to 6” in diameter with an optional strapping kit PN 80801 or any compatible hose clamps.
8" Arm Features
The adjustable 8” arm can be easily adjusted side to side and locked in any position at the mounting surface with a five point hand knob. A pair of thick nitrile rubber washers provide an adjustable clutching action that secures the side to side pan position of the arm.
The arm position can also be permanently secured by tightening a lock screw (included).
Adjustable Tilting Printer Tray Features
The sides of the printer tray adjust without tools to grip the sides of any printer from 5” to 9 ½” wide.
Rotates around the end of the 8" arm.The rotaion position can be easily adjusted and locked in any position with a five point hand knob. The position can also be permanently secured with a lock screw (included).
The tilt angle of the printer tray can be easily adjusted up and down and locked in any position with two four point hand knobs.
Includes multiple tie points for adding cable ties to secure a power supply and any extra cabling.
The tilting printer tray also makes a great telephone mount.
Optional Flat Printer Tray Features
The interior dimensions are 6½” wide by 10¼” long by 1” deep.
To order this mount with a flat printer tray use PN 80002.