My Cart (0 Item) | Sign in
PRACTICAL QUALITY SYSTEMSFast Custom Manufacturing - Nationwide Installation Services
  • Product Images

  • Product Info Sheet

Wall Mount with an 8” arm and a 75/100mm VESA Screen Pan and Tilt Head
$162.00
USD

Available In stock

Wall Mount with an 8” arm and a 75/100mm VESA Screen Pan and Tilt Head is available for purchase in increments of 1
Add To Cart

Product Code - 80053

Availability - In stock

Delivery Time - 1-7 Days.

Note: Product usually ships within 24 hours of payment/order.

Standard Features: Close Description

General Features

  • This wall mount can be used as a universal support system for VESA compatible display monitors, touchscreens and terminals for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.

  • This hardware and bracket assembly supports up to 20lbs.

  • Mounting assembly is made from steel and finished with a durable, black, low gloss, micro finish powder doat that resists fingerprints.

  • All wall mounting systems can be ordered with an optional Stud Bridge Mounting Plate (PN 50546) that can support multiple mounts and attaches across a pair of vertical wall studs spaced at 16" on center.

  • Select the Product Info Sheet link at the top of this page for detailed information.

8" Arm Features

  • One end swings side to side about the wall mounting plate and is easily locked in any position with a five point hand knob. A pair of thick nitrile rubber washers compressed between the end of the arm and the wall mounting plate provide a positive, non slip, clutching grip. The arm position can also be permanently secured by tightening a lock screw (included).

  • The other end attaches to a display screen pan and tilt head allowing 360° rotation which can be locked in any position with a five point hand knob. A thick nitrile rubber washer compressed between the end of the arm and the display screen pan and tilt head provides a positive, non slip, clutching grip. The position can be permanently secured with a lock screw (included).

Standard Pan and Tilt Head Features

  • This assembly includes a 75/100mm VESA compatible display screen pan and tilt head.

  • The pan position, or rotaton, can be easily rotated side to side and secured in any position with a five point hand knob. The pan position can also be permanently secured by tightening a lock screw (included).

  • The tilt position can be easily adjusted up and down and secured in any position with two four point hand knobs. The tilt position can also be permanently secured by tightening two lock screws (included).

  • Thick nitrile rubber washers provide a positive, non slip, cluthing grip to insure the pan and tilt head stays in place.

Single Position 25lb Mounting Plate Features

  • Attaches directly to a wall or any other flat vertical surface.

  • Supports mounting systems for display screens, monitors, touchscreens, terminals and printers for Point of Sale / POS, Kitchen Display systems / KDS up to 25lbs.

  • Includes multiple slots for cable tie points.

  • Includes four integral welded gussets which greatly strengthen the assembly.

  • Can also be attached to poles up to 36” in diameter with optional strapping kit PN 80801 or any compatible hose clamps.

Payments Methods
payment1 payment2 payment3 payment4 payment5
Need any help? Contact Us
Add To Cart