Product Info Sheet
Available In stock
Product Code - 80026
Availability - In stock
Delivery Time - 1-7 Days.
Note: Product usually ships within 24 hours of payment/order.
This assembly supports up to 15 lbs on each arm.
This assembly is made from steel and finished with a durable, black, low gloss, micro finish powder coat that resists fingerprints.
All wall mountable assemblies can be ordered with an optional stud bridge mounting plate (PN 50486) that supports up to three arms and attaches to wall studs spaced at 16" on center.
Select the Product Info Sheet link at the top of this page for detailed information.
Three Position Mounting Plate Features
Attaches to a wall or any other flat vertical surface.
Provides several options for attaching various PQS mounting systems. This configuration uses two support brackets to attach the risers.
Riser and Riser Cap Features
A 3”or 6” riser elevates an 8” arm above the mounting surface and permits the display screen and the printer to rotate horizontally allowing a wide range of positioning options.
An integral stop feature on each riser can be set at any locaton to prevent cable damage when the arm supporting the display screen or the printer is rotated around the riser.
The riser cap provides a cable tie point for securing any cables. This feature insures the cables will travel safely as the arm is rotated.
The 8” arm supporting the display screen pan and tilt head can be easily rotated and locked in any position with a three point hand knob.
The 8” arm supporting the printer tray can be easily rotated and locked in any position with a three point hand knob.
The pan and tilt head or printer can be easily removed from the arm and attached directly to the top of the riser.
To order this wall mount with two 3” risers use PN 80027
To order this wall mount with one 6” riser and one 3” riser use PN 80028
8” Arm Features
One end attaches to a riser cap assembly providing an 8” long extension.
The other end attaches to a display screen pan and tilt head or printer tray allowing 360° rotation which can be locked in any position with a five point hand knob. The position can also be permanently secured with a lock screw (included).
The five point hand knob compresses a thick, nitrile, rubber washer to provide a positive, non slip, clutching grip.
Standard Pan and Tilt Head Features
This assembly includes a 75/100mm VESA compatible screen pan and tilt head.
The pan position, or rotation, can be easily rotated side to side and secured in any position with a five point hand knob. The pan position can also be permanantly secured with a lock screw (included).
The tilt position can be easily adjusted up and down and secured in any position with two four point hand knobs. The tilt position can also be permanently secured with two lock screws (included).
Thick nitrile rubber washers provide a positive, non slip, clutching grip to insure the pan and tilt head stays in position.
Flat Printer Tray Features
The interior dimensions of the flat printer tray are 6 1/2” wide by 10 1/4” long by 1” deep.
The side to side (rotation) position can be easily adjusted and locked in any position with a five point hand knob. The position can also be permanently secured with a lock screw (included).
Includes multiple tie points for adding cable ties to secure a power supply and any extra cabling.
The printer tray also makes a great telephone mount.