My Cart (0 Item) | Sign in
PRACTICAL QUALITY SYSTEMSFast Custom Manufacturing - Nationwide Installation Services
  • Product Images

  • Product Info Sheet

  • Product Manual

Wall Mount with two 8” arms, a 75/100mm Screen Pan and Tilt Head, and a Tilting Universal Printer Mounting Tray
$470.00
USD

Available In stock

Wall Mount with two 8” arms, a 75/100mm Screen Pan and Tilt Head, and a Tilting Universal Printer Mounting Tray is available for purchase in increments of 1
Add To Cart

Product Code - 80003-300

Availability - In stock

Delivery Time - 1-7 Days.

Note: Product usually ships within 24 hours of payment/order.

Standard Features: Close Description

General Features

  • This assembly supports up to 15 lbs.

  • All wall mountable assemblies can be ordered with an optional Stud Bridge Mounting Plate (PN 50486) that supports up to three arms and attaches to wall studs spaced at 16" on center.

Mounting Plate Features

  • The three position mounting plate can support 1 or 2 arms and can may be rotated and installed vertically or horizontally to create a wider variety of mounting options.

  • This assembly supports touch screens, terminals or flat panel monitors up to approximately 22” or 15lbs. (some images are shown with a 17” screen installed).

  • Attaches to a wall or any other flat vertical surface.

Adjustable Arm Features

  • The 8” arm can be easily adjusted side to side and locked in any position at the mounting surface with the five point hand knob; the position can also be permanently secured by tightening the lock screw.

Pan and Tilt Head Features

  • This assembly includes a 75/100mm VESA compatible screen pan and tilt head. If your assembly includes a screen pan and tilt head equipped with an adaptor plate for a proprietary screen type; please refer to the pages that include information specific to that application.

  • The screen Pan and Tilt Head can be easily adjusted side to side or up and down and locked in any position with the four and five point hand knobs; the positions can also be permanently secured by tightening the lock screws.

Printer Tray Features

  • The interior dimensions of the Flat Printer Tray are 6½” Wide by 10¼” Long by 1” Deep.

  • The 8” arm supporting the Printer Tray can be easily adjusted side to side and locked in any position at the mounting surface with the five point hand knob; the position can also be permanently secured by tightening the lock screw.

  • The Flat Printer Tray position can be easily adjusted side to side and locked in any position at the end of the arm with the five point hand knob under the tray; the position can also be permanently secured by turning the lock screw on the bottom bracket of the tray into one of the holes in the end of the arm.

  • The printer tray includes multiple tie points form adding cable ties to secure the extra cabling and power supply.

  • The positions of the 8” arms adjust without tools to permit the flat printer tray and pan and tilt head to travel horizontally, allowing a range of positioning options.

Payments Methods
payment1 payment2 payment3 payment4 payment5
Need any help? Contact Us
Add To Cart