My Cart (0 Item) | Sign in
PRACTICAL QUALITY SYSTEMSFast Custom Manufacturing - Nationwide Installation Services
  • Product Images

  • Product Info Sheet

Wall Mount with two 8” arms and two 75/100mm Screen Pan and Tilt Heads
$280.00
USD

Available In stock

Wall Mount with two 8” arms and two 75/100mm Screen Pan and Tilt Heads is available for purchase in increments of 1
Add To Cart

Product Code - 80004

Availability - In stock

Delivery Time - 1-7 Days.

Note: Product usually ships within 24 hours of payment/order.

Standard Features: Close Description

General Features

  • This wall mount can be used as a universal support system for two VESA compatible monitors, touchscreens and terminals for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.

  • All wall mounting systems can be ordered with an optional Stud Bridge Mounting Plate (PN 50546) that can support multiple mounts and attaches across a pair of vertical wall studs spaced at 16" on center.

  • This hardware and bracket assembly supports up to 15 lbs. on each arm.

Mounting Plate Features

  • The three position mounting plate can support 1 or 2 arms and can may be rotated and installed vertically or horizontally to create a wider variety of mounting options.

  • This assembly supports touch screens, terminals or flat panel monitors up to approximately 22” or 15lbs. (some images are shown with a 17” screen installed).

  • Attaches to a wall or any other flat vertical surface.

Adjustable 8" Arm Features

  • The adjustable 8” arm can be easily adjusted side to side and locked in any position at the mounting surface with the five point hand knob. A pair of thick Nitrile rubber washers provide an adjustable clutching action that secures the side to side pan position of the arm disc plates inside of the stand off bracket.

  • The arm position can also be permanently secured by tightening the lock screw in the stand off bracket to secure it into one of the holes in the disc plate on the end of the arm.

Standard Pan and Tilt Head Features

  • This assembly includes a 75/100mm VESA compatible screen pan and tilt head.  If your assembly includes an adaptor plate for a proprietary screen type; please refer to the pages that include information specific to that application.

  • The screen Pan Position can be easily adjusted side to side and locked in any position with the five point hand knob. The pan position can also be permanently secured by tightening the lock screw in the base of the head to secure it into one of the holes in the round plate on the end of the arm.

  • The screen Tilt Position can be easily adjusted up and down and locked in any position with the two four point hand knobs. The tilt position can also be permanently secured by tightening the lock screws on the sides of the head to secure it into one of the holes in the sides of the base bracket.

  • Thick Nitrile rubber washers provide an adjustable clutching action that secures the up and down tilt and side to side pan position of the head.

Payments Methods
payment1 payment2 payment3 payment4 payment5
Need any help? Contact Us
Add To Cart