4X4 Clamp On Mount 100-400mm Two screen VESA Tilting Mount, 2 screens up to 70” class
$1,355.00
In stock
Product Code
81562
Product Code | 81562 |
---|---|
Availability | In Stock |
Delivery Time | 1-7 Days |
Note | Product usually ships within 24 hours of payment/order. |
- For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.
General Features
- The 100-400mm VESA Clamp on mount allows two screens up to 70” class to be mounted in a back to back configuration in either portrait or landscape orientation and tilted forward up to 25 degrees.
- Includes VESA mounting patterns for 100mm, 200mm, 300mm, 400mm or any height and width combination of these mounting standards.
- The Tilt Mount securely clamps to any 4”x4” vertical Pole or Stainless wireway assembly.
- Click for more info on compatible Stainless steel wireway assemblies.
- The screen tilt position is adjustable from 0 degrees flat to 25 degrees forward and is secured with four 5-point hand knobs located behind the back of the screen, allowing easy adjustment without tools.
- Two Phillips head screws on the inner ends of the tilt link plates can be tightened into angle selection holes to more permanently lock the tilt position in increments of 5 degrees.
- Both of the channel clamping sections include cut out areas that allow the mount to be installed over two standard single gang outlets.
- Dual safety latches secure the tilt assembly to the channel clamp.
- Both of the channel clamping sections include through holes to allow self-drilling screws to be installed into the pole for a more permanent method of securing the mount.
- The clamping channel sections include a cut out section that allows two single gang power and /or data outlets to be installed behind the screen.
- Also available in a double configuration (PN 81562) with two screens oriented “back to back” on opposite sides of the pole assembly.
Write Your Own Review
Related Products
Check items to add to the cart or