TOAST Compatible Fully Articulated Shelf Edge Mount for Terminal + Enhanced Pan-Tilt Head

General Features

• Both of these shelf edge mounts can be used as a universal support system for VESA compatible monitors, touchscreens and terminals for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.

• An innovative set of joint assemblies allow seven axis of position adjustment when attached to a shelf or other horizontal surface.

• Beyond having flexible articulation; this mount has the key feature of being easily LOCKED in any desired screen position; this ability is VERY important when using touch screen equipment as it PREVENTS the screen from moving away from the user each time a touch is input.

• This assembly supports up to 25 lbs., is made from steel and finished with a durable, silver-gray, semi-gloss, powder coat that resists fingerprints and emulates stainless steel.

• This mounting package includes the following individual components PN 67099-CH, PN 67100-CH, PN 67101, PN 67102, PN 67103, PN 67081-CH.

• Visit kitchendisplaysystems.com for a free, easy to understand tutorial that covers all aspects of Kitchen Display Systems knowledge!

Enhanced VESA 75/100mm Pan and Tilt Head with side-to-side Tilt adjustment on an Adjustable Arm

• A universal mount that works with any 75mm or 100mm VESA compatible screen.

• Tightening the 2 four-point knobs applies variable clutching resistance to allow adjustment of the up and down tilt position of the screen. Tighten either of the two 10-32 Phillips head screws adjacent to the four-point knobs to permanently secure the tilt position.

• Tightening the five- point knob below the end of the Arm applies variable clutching resistance to allow adjustment of the side-to-side pan position of the screen. Tighten the 10-32 Phillips head screw on the lower Panning plate into one of the holes in the end of the arm to permanently secure the pan position.

• Tightening the three - point knob at the rear center of the VESA mounting plate applies variable resistance to allow adjustment of the side-to-side screen tilt position.

• Includes 4 pieces of M4 Phillips head screws to attach the VESA mounting plate to the back of the screen.

Double Cross Receiver with Sliding L Arm and Sliding Straight Arm

• The Double Cross Receiver allows two arms to be joined at 90 degrees angles from each other in either the horizontal or vertical plane.

• To adjust the positions of the arms; remove the 3/16” push pins to adjust the extended positions of the Sliding L Arm and the Sliding Straight Arm in the Double Cross Receiver to the desired positions; then reinsert the pins.

• Note that the L arm and the Straight Arm can be inserted into the Cross Receiver in a variety of ways to create multiple different configurations.

Panning Shelf Edge Receiver Mounting Plate and Sliding Straight Arm

• The Panning Shelf Edge Receiver Mounting Plate supports one arm assembly and can be attached above or below any flat, smooth horizontal surface.

• Attach the mounting plate to the mounting surface with appropriate fasteners.

• To adjust the arm position; remove the 3/16” push pin to extend or retract the position of the Sliding Straight Arm in the Panning receiver to the desired position; then reinsert the pin.

• To adjust the side-to-side pan position of the Straight Arm; remove the 10-32 Thumbscrew from the top of the Panning receiver; adjust the arm position, then reinstall the thumbscrew into one of the holes in the top of the round section on the mounting plate.

We believe in ethical SEO relevancy; the following section was included to assist the all-knowing algorithms in locating this page; however, some humans like it too. 

• Wall Mounts for Epson Terminals, Shelf edge mounts for Toast Terminals, Shelf edge mounts for Elo Terminals,  Pole mounts for Toast Terminals,  Pole mounts for Elo Terminals, Under counter  mounts for Toast Terminals, Under counter  mounts for  Elo Terminals,  Counter top mounts for Toast Terminals,  Counter top mounts for Elo Terminals,  Ceiling Mounts for Toast Terminals,  Ceiling Mounts for Elo Terminals,  Floor stands for Toast printers,  Floor stands for Elo Terminals,  Pole stands for Toast Terminals,  Pole stands for Elo Terminals,  Kiosks for Toast Terminals,  Kiosks for Elo Terminals.