4X4 Clamp on Mount + 100mm VESA Flat

• For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

• This versatile mounting system clamps securely without tools at any point along a vertical 4” square pole with the mounting plate oriented parallel to any of the four sides of a pole.
• This assembly allows any 100mm VESA compatible screen to be attached flush to the mounting plate which is raised 1” inch out from the surface of the vertical 4x4 pole assembly.
• The mount Includes 4 EA M4 X 10mm L Phillips head screws to attach the screen to the mounting plate.
• The side brackets of the pole clamping system are hinged at the mounting plate and close around the 4x4 pole; two four point hand knobs are inserted through the rear flanges and tightened to provide the clamping action. The knobs can be replaced with 5/16” X 1” L hex or security head bolts if desired.
• Cut out sections on each of the clamping sides allow the mount to be installed over a standard single gang outlet.
• Self- tapping screws can also be installed into the pole through holes in either of the hinging side brackets to secure the mount permanently.