4X4 Clamp On Mount + 12” X 24” Stainless table

• For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

• This versatile mounting system clamps securely at any point along a vertical 4”W X 4”D pole assembly with the 24”L side of the table top oriented parallel to any of the four sides of a pole without tools.
• The stainless steel table top includes four, smooth, rounded corners is supported by a heavy duty, galvanized, support bracket that attaches to the underside of the table top and to the mounting plate of the 4x4 Clamp On mount.
• Multiple tables can be installed one above the other, on opposite sides of the pole or offset at 90 degrees to either side to create a sturdy, self-supporting shelving system with a minimum spacing of 6 inches between shelves.
• The side brackets of the pole clamping system are hinged at the mounting plate and close around the 4x4 pole; two four point hand knobs are inserted through the rear flanges and tightened to provide the clamping action. The knobs can be replaced with 5/16” X 1” L hex or security head bolts if desired.
• Self-tapping screws can also be installed into the pole through holes in either of the hinging side brackets to secure the mount permanently.