Stationary Podium + 24X24 Cabinet + Adjustable VESA Pedestal Mount + Accessory Pack 1

• For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

Overview of all 24X24 Kiosk Cabinets

Standard POS Kiosks, Self-Check Out Kiosks or Podium Cabinets include a stainless steel table top, measure 24” Wide, 24” Deep, are from  34-36“ tall and can be configured with MANY options.

4X4 Pedestal and Pole Assemblies- These attach to the center of the table top ranging from an 18” tall pedestal to a pole system that supports a large screen displays below the ceiling. Both assemblies can include multiple adjustable arms that support screens, peripheral equipment with all cabling concealed internally.

VESA Pedestal Mount- This mount attaches to the center of the cabinet table top to support 50, 75 and 100mm VESA compatible screens up to 32” class and features adjustable height, side to side panning and up and down tilt position of the screen.

Fixed or Folding Side Tables and Lower Shelves- Available in 12” D X 24” or 36”L configurations; when used with the 24”X 24” square center table they create a 48” W x 36” D work surface. Three more side tables install as shelving half way down the front, right and left sides of the cabinet. Side tables on mobile cabinets fold down to simplify transport.

Folding Rear Side Shelf - Side Shelves attach to the right, left or both rear corners of the cabinet and can be used as a bagging station or can support a T shirt bag holder, a scale or other equipment. Rear side shelves fold easy behind the cabinet for transport in mobile applications.

Adjustable Leveling Feet with Hold down Brackets- All stationary cabinets include four heavy duty leveling feet and a set of hold down brackets that secure the base of the cabinet to the floor.

Caster Wheels for Mobile Cabinets- heavy duty swiveling wheels with brakes are attached to the bottom of cabinets without side tables.  Folding Stabilizer Legs with Caster Wheels are used for added stability on Mobile Cabinets with Side tables. All mobile cabinets include removable transport hand straps.

Standard Bumpers – Cabinets include a set of attractive; yet heavy duty, stainless steel, rounded bumpers installed vertically on the right and left front corners and three installed horizontally along the bottom edges of the front, right and left sides.

Internal shelves – Up to three shelves can be installed inside of the cabinet to create a variety of different sized internal cabinet spaces.

Doors- A full door covers the entire rear of the cabinet while half doors cover the upper, lower or both halves of the rear of the cabinet. All doors include magnetic latches and provision for optional cam locks.

Drawers- Half size drawers can cover the upper, lower or both halves of the rear of the cabinet or up to four quarter size drawers can also be installed. Drawers include integral pulls and provision for optional cam locks.

Slide Out 19” Equipment Rack Drawer- Rack drawers are 7U -14“ H and install on the top of bottom panel or on top of the middle shelf.

Reinforcement Beams – One heavy duty, galvanized steel beam is one installed across the middle of the table top and two more are installed across the bottom panel to support adjustable feet on stationary cabinets or wheel assemblies on mobile cabinets.

Multiple Cable Routing options- All pedestal, pole and VESA mounts attached to the table top allow concealed internal cable routing. The front right and left corners of the cabinet include cable grommets for cabling from external equipment. Interior shelves and bottom panel have slots for routing cables vertically through and up from below the cabinet.

Provision for junction boxes on the inside of the cabinet- Patterns of tapped holes are provided along both sides of the interior front of the cabinet to support multiple standard 2 gang junction boxes.

 What makes these systems different?

• No engineering degree required to understand how the individual components fit together.
• The modular design allows total system flexibility for simplified customization.
• Designing a system doesn’t require hiring an architect.
• There’s no lost time waiting for custom millwork or fixtures having to be made to fit your space.
• No need to cut and trench concrete floors; these systems can feed power and data down from the ceiling.
• You don’t need to deal with multiple contractors; these systems can be installed by any competent electrician.
• The systems are modular and can be easily reconfigured if your needs change.
• There are NO molded plastic structural parts to break or wear out, no springs or pneumatic cylinders to fail and NO special tools required for position adjustment.

Need something special? Our in house design team offers fast turnaround on custom parts. If you wish to order a quantity of custom products, we will create a new assembly specifically pre-configured for your application.