Pole Mount with an 8" Arm and a Flat Printer Mounting Tray

• For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

• This pole mount can be used as a universal support system for printers for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
• This assembly is made from steel and supports up to 15 lbs.
• This mounting package includes the following individual product components PN 67095, PN 67090.

Flat Printer Tray Features

• The interior dimensions are 6½” wide by 10¼” long by 1” deep.
• The 8” arm supporting the printer tray can be easily adjusted side to side and locked in any position at the mounting surface with a five point hand knob. The position can also be permanently secured by tightening a lock screw.
• The flat printer tray position can be easily adjusted side to side and locked in any position at the end of the arm with a five point hand knob. The position can also be permanently secured with a lock screw.
• The printer tray includes multiple tie points for adding cable ties to secure any extra cabling and power supply.

Mounting Arm Features

• The mount arm can be attached to poles three different ways with a wide range of outside diameters.
• One attachment option for round pole diameters from 1” to 2.5” is to install self-drilling screws through the horizontal slots at the top and bottom of the angle section.
• To attach the mount to a round pole that is one inch or larger in diameter with hose clamps. Insert the clamps through the vertical slots at the top and bottom of the angle section. Refer to the hose clamp range list to select the correct size clamps for your pole diameter.
• The arm assembly is made entirely of stainless steel and can be tack welded directly to standard round stainless steel shelf support poles commonly found in commercial kitchens.
• This assembly supports touch screens, terminals or flat panel monitors up to approximately 22” or 15lbs.
• The mount arm can also be attached to the corners of any square or rectangular pole that is one inch or larger in diameter with self-drilling screws or hose clamps.
• The mount arm includes circular cable path openings on the top and bottom surface of the arm and at on the mounting plate angle section where it contacts the pole to allow for internal routing of data and power cabling.

We believe in ethical SEO relevancy; the following section was included to assist the all-knowing algorithms in locating this page; however, some humans like it too. 

• Printer Pole bracket, printer Pole mount, printer Pole mount bracket, printer Pole mounting bracket, Printer Pole Tray, Printer Shelf, Kitchen printer, restaurant printer, POS printer, Point of Sale printer, Epson Printer shelf, Healthcare printer, Industrial printer, ID printer, Office printer, Manufacturing printer.