Basic Shelf Edge KDS Support Package for most 15" and smaller VESA Monitors + MICROS Oracle 166 or 210 Controller + MICROS Oracle MBB-10 or MBB-20 Bump Bar

• For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

• Visit kitchendisplaysystems.com for a free, easy to understand tutorial that covers all aspects of Kitchen Display Systems knowledge!
• This mounting package includes the following individual product components which are also available separately: PN 80117 and PN 80501.
• For more information on the individual components included in this package please refer to the assembly sketches in this document and the downloadable product information sheets available on our website for each of the product pages for each part number.
• This mounting package supports most 15 inch or smaller VESA compatible monitors or touchscreens.
• The screen mounting assembly supports up to 25 pounds of equipment and attaches directly to a counter top or other flat horizontal surface.
• The bump bar mount is attached between the back of the screen and the pan and tilt head of the mounting system. It supports the MICROS ORACLE 166 and 210 display controllers and the power supply. Associated cabling can be neatly attached with cable ties.
• A MICROS ORACLE MBB-10 or MBB-20 bump bar can be attached directly to the mounting plate below the front of the screen.
• Includes a 24” long Display Port male to male video cable to connect the controller to the monitor.
• The screen mount included in this package allows for basic articulation of the screen position. A similar package is offered with a mount that allows full adjustability of the screen position.
• These mounting packages are designed to offer simplified selection of the components needed to support your Kitchen Display System equipment.
• These packages of components are only a small sample of the many options that are available. Contact our sales team if you would like us to assemble a custom package for you.
• Purchasing these components as a package automatically qualifies for a discounted price over purchasing the same items separately. This discounted package price cannot be combined with any other discount programs.

General Features

• This shelf edge mount can be used as a universal support system for VESA compatible monitors, A MICROS compatible controller and bump bar holder for Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
• An innovative set of joint assemblies allow four axis of position adjustment when attached to a shelf or other horizontal surface.
• Beyond having flexible articulation; this mount has the key feature of being easily LOCKED in any desired screen position; this ability is VERY important when using touch screen equipment as it PREVENTS the screen from moving away from the user each time a touch is input.
• This assembly supports up to 25 lbs., is made from steel and finished with a durable, silver-gray, semi-gloss, powder coat that resists fingerprints and emulates stainless steel.
• Visit kitchendisplaysystems.com for a free, easy to understand tutorial that covers all aspects of Kitchen Display Systems knowledge!
• For more information on the individual components included in this package please refer to the assembly sketches in this document and the downloadable product information sheets available on our website for each of the product pages for each part number.

Enhanced VESA 75/100mm Pan and Tilt Head with side-to-side Tilt adjustment on an Adjustable Arm

• This shelf edge mount can be used as a universal support system for VESA compatible monitors, A MICROS compatible controller and bump bar holder and any 75mm or 100mm VESA compatible screen.
• Tightening the 2 four-point knobs applies variable clutching resistance to allow adjustment of the up and down tilt position of the screen. Tighten either of the two 10-32 Phillips head screws adjacent to the four-point knobs to permanently secure the tilt position.
• Tightening the five- point knob below the end of the Arm applies variable clutching resistance to allow adjustment of the side-to-side pan position of the screen. Tighten the 10-32 Phillips head screw on the lower Panning plate into one of the holes in the end of the arm to permanently secure the pan position.
• Tightening the three - point knob at the rear center of the VESA mounting plate applies variable resistance to allow adjustment of the side-to-side screen tilt position.
• Includes 4 pieces of M4 Phillips head screws to attach the VESA mounting plate to the back of the screen.

Fixed Shelf Edge Receiver Mounting Plate and Sliding Straight Arm

• The Fixed Shelf Edge Receiver Mounting Plate can be attached to any flat, smooth horizontal or vertical surface.
• Attach the mounting plate to the mounting surface with appropriate fasteners.
• Remove the 3/16” push pin to adjust the extended position of the Sliding Straight Arm to the desired position in the Fixed Shelf Edge Receiver; then reinsert the pin.

We believe in ethical SEO relevancy; the following section was included to assist the all-knowing algorithms in locating this page; however, some humans like it too. 

• MICROS Shelf edge mount, MICROS Shelf edge mounting bracket, MICROS Shelf edge mount bracket, MICROS Terminal Shelf edge mount, MICROS Terminal Shelf edge mounting bracket, MICROS Terminal Shelf edge mount bracket.
• MICROS Point of Sale terminal Shelf edge mount, MICROS KDS Shelf edge mount, MICROS KDS Shelf edge mounting bracket, MICROS KDS Shelf edge mount bracket, MICROS Kitchen Display System Shelf edge mount.

We also manufacture a full line of mounting systems for the Oracle MICROS compatible Terminals that use the MICROS Quick Connect tabs and slots mounting standard:

• Oracle MICROS Workstation 625X.
• Oracle MICROS Workstation 655X.
• Oracle MICROS Workstation 6 POS Terminal.
• Oracle MICROS Workstation 610.
• Oracle MICROS Workstation 620.
• Oracle MICROS Workstation 625.
• Oracle MICROS Workstation 650.
• Oracle MICROS Workstation 625.
• Oracle MICROS Workstation 655.
• Oracle MICROS Compact Workstation 310.
• Oracle MICROS Express Station 4 Series.
• Oracle MICROS Express Station 400.
• Oracle MICROS Express Station 410.