Basic Wall Mount KDS Support Package for most 15" or smaller VESA monitors + MICROS Oracle 166 or 210 Controller + MICROS Oracle MBB-10 or MBB-20 Bump Bar

• For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

• Visit kitchendisplaysystems.com for a free, easy to understand tutorial that covers all aspects of Kitchen Display Systems knowledge!
• This mounting package includes the following individual product components which are also available separately: PN 80053 and PN 80501.
• For more information on the individual components included in this package please refer to the assembly sketches in this document and the downloadable product information sheets available on our website for each of the product pages for each part number.
• This mounting package supports most 15 inch or smaller VESA compatible monitors or touchscreens.
• The screen mounting assembly supports up to 25 pounds of equipment and attaches directly to a wall or other flat vertical surface.
• The bump bar mount is attached between the back of the screen and the pan and tilt head of the mounting system. It supports the MICROS ORACLE 166 and 210 display controllers and the power supply. Associated cabling can be neatly attached with cable ties.
• A MICROS Oracle MBB-10 or MBB-20 bump bar can be attached directly to the mounting plate below the front of the screen.
• Includes a 24” long VGA male to male video cable to connect the controller to the monitor.
• The screen mount included in this package allows for basic adjustments of the screen position. A similar package is offered with a fully articulated mount that allows for a much greater range of screen position adjustability.
• These mounting packages are designed to offer a simplified selection of the components needed to support your Kitchen Display System equipment.
• These packages of components are only a small sample of the many options that are available. Contact our sales team if you would like us to assemble a custom package for you.
• Purchasing these components as a package automatically qualifies for a discounted price over purchasing the same items separately. This discounted package price cannot be combined with any other discount programs.

Standard VESA 75-100mm Pan and Tilt Head on an Adjustable Arm

• This wall mount can be used as a universal support system for VESA compatible monitors, a MICROS compatible controller and bump bar holder for Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
• Tightening the 2 four-point knobs applies variable clutching resistance to allow adjustment of the up and down tilt position of the screen. Tighten either of the two 10-32 Phillips head screws adjacent to the four-point knobs to permanently secure the tilt position.
• Tightening the five- point knob below the end of the Arm applies variable clutching resistance to allow adjustment of the side-to-side pan position of the screen.
• Tighten the 10-32 Phillips head screw on the lower Panning plate into one of the holes in the end of the arm to permanently secure the pan position.
• Includes 4 pieces of M4 Phillips head screws to attach the VESA mounting plate to the back of the screen.

Single Position 25lb Wall Mounting Plate with Integral Standoff bracket and Arm

• The Single Position 25lb Wall Mounting Plate with Integral Standoff bracket supports one arm, allows side to side adjustment of the arm and attaches to any flat, smooth vertical surface.
• Attach the mounting plate to the Wall or other flat vertical surface with appropriate fasteners.
• Tightening the five- point knob on the top of the Standoff Bracket applies variable clutching resistance to allow adjustment of the side-to-side pan position of the Arm.
• To permanently lock the side-to-side pan position of the Arm; slightly loosen the 10-32 Phillips head screw on the top of the Standoff bracket, move the arm to the new desired permanent position; tighten the screw into one of the holes in the end of the arm to secure the new position.
• Note that the mounting plate includes slots along the side so that it can be attached to poles up to 36” in diameter with our optional strapping kit PN 80801 or any other compatible hose clamps.
• The mounting plate includes multiple slots for cable tie points.

We believe in ethical SEO relevancy; the following section was included to assist the all-knowing algorithms in locating this page; however, some humans like it too. 

• MICROS Wall mount, MICROS Wall mounting bracket, MICROS Wall mount bracket, MICROS Terminal Wall mount, MICROS Terminal Wall mounting bracket, MICROS Terminal Wall mount bracket.
• MICROS Point of Sale terminal Wall mount, MICROS KDS Wall mount, MICROS KDS Wall mounting bracket, MICROS KDS Wall mount bracket, MICROS Kitchen Display System Wall mount.

We also manufacture a full line of mounting systems for the Oracle MICROS compatible Terminals that use the MICROS Quick Connect tabs and slots mounting standard:

• Oracle MICROS Workstation 625X.
• Oracle MICROS Workstation 655X.
• Oracle MICROS Workstation 6 POS Terminal.
• Oracle MICROS Workstation 610.
• Oracle MICROS Workstation 620.
• Oracle MICROS Workstation 625.
• Oracle MICROS Workstation 650.
• Oracle MICROS Workstation 625.
• Oracle MICROS Workstation 655.
• Oracle MICROS Compact Workstation 310.
• Oracle MICROS Express Station 4 Series.
• Oracle MICROS Express Station 400.
• Oracle MICROS Express Station 410.