Wall Mount + 2-8” Arms + VESA Screen + Ingenico Lane Reader Pan - Tilt Heads

• For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.
• This assembly includes a wall mounting plate with a with two standoff brackets that allow the arms and the Pan and Tilt Heads to travel horizontally side to side from the wall surface allowing a wide range of positioning options.
• One Pan and Tilt Head supports any 50, 75 or 100mm VESA compatible screen, the other Pan and Tilt Head is compatible with Ingenico Readers Lane 3000, 5000 v.2, Lane 7000, 8000 and all future reader models equipped with the Lane clip mounting standard.
• Note- the right and left side positions of the Pan and Tilt Heads on the ends of the arms are interchangeable.

Overview

• These mounts are designed to be the highest quality and most durable support systems available and are compatible with Ingenico Readers Lane 3000, 5000 v.2, Lane 7000, 8000 and all future reader models equipped with the Lane clip mounting standard. 
• See the last pages of this document for a list of preconfigured assemblies that support the Ingenico Lane Readers in some of the more common mounting scenarios.
• If you need more mounting options, know that all of the VESA compatible mounting systems included on our website can be modified to support the Ingenico Lane Readers.
• If your application requires a quantity of special use mounting systems; contact our design team for quick turnaround on custom solutions.
• No special tools are required to adjust the position of the reader on these mounts; easy to operate hand knobs are used to apply variable clutching resistance to the pan and tilt assembly to securely lock the position of the reader.
• The up and down tilt position of the reader is adjusted by tightening the 2 four-point knobs on the side of the Pan and tilt assembly. Tighten either of the two 10-32 Phillips head screws adjacent to the four-point knobs to permanently secure the tilt position.
•  The side-to-side pan position of the reader is adjusted by tightening the five- point knob below the end of the Arm. Tighten the 10-32 Phillips head screw on the lower Panning plate into one of the holes in the end of the arm to permanently secure the pan position.
• Note that the pan and tilt head assembly can also be used to support any screen that has the 50, 75 or 100mm VESA mounting standard with the Ingenico Lane clip removed.
• These assemblies are made almost entirely of steel with a durable, micro wrinkle, semi-gloss black, powder coat finish.
• Also known as Ingenico Lane Reader Mount, Ingenico Lane retail PIN Pad Mount, Ingenico Lane Tap Touch Reader Stand, Ingenico Lane Smartcard Reader Stand,  Ingenico Lane Multi-Clip mount, Ingenico Lane Clip Mount, Ingenico Lane Clip Back Plate, Ingenico Lane PIN Pad mount, Ingenico Lane Locking Plate Clip, Ingenico Lane quick connect clip.
• This mounting package includes the following individual product components PN 50044, PN 50046, PN 67048, PN 67080, PN 21237.

Standard VESA 50-75-100mm Pan and Tilt Head on an Adjustable Arm

• A universal mount that works with any 50mm, 75mm or 100mm VESA compatible screen.
• Tightening the 2 four-point knobs applies variable clutching resistance to allow adjustment of the up and down tilt position of the screen. Tighten either of the two 10-32 Phillips head screws adjacent to the four-point knobs to permanently secure the tilt position.
• Tightening the five- point knob below the end of the Arm applies variable clutching resistance to allow adjustment of the side-to-side pan position of the screen.
• Tighten the 10-32 Phillips head screw on the lower Panning plate into one of the holes in the end of the arm to permanently secure the pan position.
• Includes 4 pieces of M4 Phillips head screws to attach the VESA mounting plate to the back of the screen.

Ingenico Lane Pan and Tilt Head on an Adjustable Arm

• A universal mount that works Ingenico Lane 3000, 5000 v.2, Lane 7000, 8000 and future readers equipped with the Ingenico Lane clip mounting standard.
• Tightening the 2 four-point knobs applies variable clutching resistance to allow adjustment of the up and down tilt position of the reader. Tighten either of the two 10-32 Phillips head screws adjacent to the four-point knobs to permanently secure the tilt position.
• Tightening the five- point knob below the end of the Arm applies variable clutching resistance to allow adjustment of the side-to-side pan position of the reader.
• Tighten the 10-32 Phillips head screw on the lower Panning plate into one of the holes in the end of the arm to permanently secure the pan position.

Double Wall Mounting Plate, 2 Standoff Brackets and 2 Arms

• The Standoff brackets connect the arms to the mounting plate and allow them to travel horizontally allowing a wide range side to side positioning options.
• Attach the mounting plate to the Wall or other flat vertical surface with appropriate fasteners.
• Note that the Standoff brackets and arms can be attached to the mounting plate with the mounting plate in either vertical or horizontal orientation.
• Tightening the five- point knobs on the tops of the Standoff brackets applies variable clutching resistance to allow adjustment of the side-to-side pan positions of the Arms. To permanently lock the side-to-side pan position of the Arms; slightly loosen the 10-32 Phillips head screw on the top of the Standoff bracket, move the arm to the new desired permanent position; tighten the screw into one of the holes in the end of the arm to secure the new position.
• Note- the right and left side positions of the Pan and Tilt Heads on the ends of the arms are interchangeable.

Relevant Search Terms and SEO

The Universal Tap Touch Reader VESA Mounting Plate is compatible with the following readers, technologies and mounting applications:

• Ingenico UPM, Universal Payment Mount, Ingenico Quick Connect Clip, Quick Clip
• Tap reader, touch reader, Schlage MT20, RFIDeas, RF IDeas, WAVE ID Plus.
• Transact Campus PS4101, Square reader, Clover Go Contactless Reader, Glossgenius.
• HID Mobile Access, Schlage Electronics. Allegion, TSL Mobile, ProxPoint Plus, UHPPOTE.
• VIVOpay, Speco, HID OMNIKEY, HP USB Universal Card Reader, ON TRACK INNOVATIONS.
• Ingenico Mobile Solutions, Linear Reader, Shopify Tap, CHERRY SmartTerminal, ThingMagic.
• iCLASS, Omnikey HID, smartphone, Multi-Technology Enrollment Reader, USB Reader.
• Smartcard Reader, Contactless Card Reader, Digital Wallet, merchant card, Credit cards.
• Smart card, Proximity Reader, BLE Smart Card Readers. Credential reader, campus payments.
• One card campus ID's, college commerce card, Proximity ID badge reader, RF proximity reader.
• SwipeSimple, badge reader, smart device, Mobile Credential, NFC technology, ApplePay, Apple Pay.
• AndroidPay, Google Pay, Google Pay for Android, Samsung Pay, Amazon Pay, Paytm, Cash App.
• Wise, Venmo, PayPal, Zelle, Skrill, Alipay, Walmart Pay, Dwolla, Touch Reader VESA Mounting Plate.
• Back of screen reader VESA mount, Tap Reader VESA Mounting Plate.