4X4 Clamp on Mount+ Side Shelf and Bag Holder

• For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

• This versatile mounting system clamps securely at any point along a vertical 4”W X 4”D pole assembly with the mounting base oriented parallel to any of the four sides of a pole without tools.
• When the Clamp on Side Shelf with Bag Holder is attached to the 4X4 pole; the rear surface of the Shelf it is located approximately 2” out from the surface of the vertical pole assembly.
• The side brackets of the pole clamping system are hinged at the mounting plate and close around the 4x4 pole; two four point hand knobs are inserted through the rear flanges and tightened to provide the clamping action. The knobs can be replaced with 5/16” X 1” L hex or security head bolts if desired.
• Self-tapping screws can also be installed into the pole through holes in either of the hinging side brackets to secure the mount permanently.
• The Side Shelf mounting plate has three positions that allow the Side Shelf with bag holder to be installed in the center of the plate or to be offset 3.5” to either the right or left sides.
• The T Shirt Bag Holder overall dimensions are 12" Wide x 12" Deep x 16" High. The bag holder stand is made of chromed steel rod with a 1/2" thick White PVC Plastic Sheet Base. Fits standard, 11 ½” Wide x 6” Deep x 21” High Bags. Holds medium-sized bags open for easy filling and can accommodate a large supply of bags. Smaller bags can fit on side hooks. Bags sold separately.