TOAST Compatible Shelf Edge Mount for Terminal + Adjustable Length Arm + Enhanced Pan-Tilt Head

General Features

• Both of these shelf edge mounts can be used as a universal support system for VESA compatible monitors, touchscreens and terminals for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
• An innovative set of joint assemblies allow four axis of position adjustment when attached to a shelf or other horizontal surface.
• Beyond having
• This assembly supports up to 25 lbs., is made from steel and finished with a durable, silver-gray, semi-gloss, powder coat that resists fingerprints and emulates stainless steel.
• flexible articulation; this mount has the key feature of being easily LOCKED in any desired screen position; this ability is VERY important when using touch screen equipment as it PREVENTS the screen from moving away from the user each time a touch is input.
• Visit kitchendisplaysystems.com for a free, easy to understand tutorial that covers all aspects of Kitchen Display Systems knowledge!
• For more information on the individual components included in this package please refer to the assembly sketches in this document and the downloadable product information sheets available on our website for each of the product pages for each part number.

Enhanced VESA 75/100mm Pan and Tilt Head with side-to-side Tilt adjustment on an Adjustable Arm

• A universal mount that works with any 75mm or 100mm VESA compatible screen.

• Tightening the 2 four-point knobs applies variable clutching resistance to allow adjustment of the up and down tilt position of the screen. Tighten either of the two 10-32 Phillips head screws adjacent to the four-point knobs to permanently secure the tilt position.

• Tightening the five- point knob below the end of the Arm applies variable clutching resistance to allow adjustment of the side-to-side pan position of the screen. Tighten the 10-32 Phillips head screw on the lower Panning plate into one of the holes in the end of the arm to permanently secure the pan position.

• Tightening the three - point knob at the rear center of the VESA mounting plate applies variable resistance to allow adjustment of the side-to-side screen tilt position.

• Includes 4 pieces of M4 Phillips head screws to attach the VESA mounting plate to the back of the screen.

Fixed Shelf Edge Receiver Mounting Plate and Sliding Straight Arm

• The Fixed Shelf Edge Receiver Mounting Plate can be attached to any flat, smooth horizontal or vertical surface.

• Attach the mounting plate to the mounting surface with appropriate fasteners.

• Remove the 3/16” push pin to adjust the extended position of the Sliding Straight Arm to the desired position in the Fixed Shelf Edge Receiver; then reinsert the pin.

We believe in ethical SEO relevancy; the following section was included to assist the all-knowing algorithms in locating this page; however, some humans like it too. 

• Wall Mounts for Epson Terminals, Shelf edge mounts for Toast Terminals, Shelf edge mounts for Elo Terminals,  Pole mounts for Toast Terminals,  Pole mounts for Elo Terminals, Under counter  mounts for Toast Terminals, Under counter  mounts for  Elo Terminals,  Counter top mounts for Toast Terminals,  Counter top mounts for Elo Terminals,  Ceiling Mounts for Toast Terminals,  Ceiling Mounts for Elo Terminals,  Floor stands for Toast printers,  Floor stands for Elo Terminals,  Pole stands for Toast Terminals,  Pole stands for Elo Terminals,  Kiosks for Toast Terminals,  Kiosks for Elo Terminals.