Stainless Steel Printer Tray, Shelf edge or Wall Mount, with Power Supply Storage Compartment
| Product Code | 80313-TOAST |
|---|---|
| Availability | In Stock |
| Delivery Time | 1-7 Days |
| Note | Product usually ships within 24 hours of payment/order. |
Overview of TOAST Compatible Printer Mounting Systems
-
Know that most of the printer mounting systems available on our website are compatible with TOAST and Epson Printers. The list of specific mounting systems that are described as “compatible” were compiled as a convenient way to locate compatible mounts and simplify the selection process.
-
This printer mounting system is compatible with Toast, Epson and other printers with external dimensions of (6½” W X 10 1⁄4” L) or smaller.
-
Many systems are available for other mounting scenarios, across a wide variety of environments.
-
Custom product designs and custom product finish colors are available for quantity orders.
-
If you are implementing a quantity of systems; know that we offer free System Design Consultation; Nationwide Installation Services are also available.
General Features Printer Tray PN 80313
-
This shelf edge or wall mount can be used as a universal mounting bracket for Point of Sale / POS printers in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
-
Designed with pre punched mounting holes along both sides and rear section to allow easy attachment to any shelf edge, wall or other flat vertical surface.
-
Supports printers up to 6.5” wide X 10” long and up to 10 lbs.
-
Incudes a generous sized lower compartment for storing a power supply and any excess cabling.
-
Includes a 1.25” diameter hole in the lower rear center section for cable passage.
-
The tray’s rear end is angled at 20 degrees to improve access to the paper feed slot on the top of the printer.
-
Includes a cable path hole on the bottom to allow access to outlets located below the tray and cable tie points at both rear corners.
-
When used with most standard length printers there is enough room behind the printer to store an extra roll of printer paper.
-
Made entirely of brushed stainless steel to resist harsh environments. Stress points are reinforced with tack welds to provide additional reinforcement.
-
The dimensions of the storage compartment are approximately 1.5"H X 6.3”W X 8.28” D
-
The sides of the front and rear sections of the storage compartment have cut out sections for easy installation of the power supply and cord.
Toast Terminals
- Toast Flex POS 14"
- Toast Flex for Guest 8"
- Toast Flex for Kitchen 14", 22"
- Toast Kitchen Display System, Toast KDS 14", 22"
- Toast Kiosk 22"
Toast Accessories
- Toast Printer TP200, Impact Printer, Label Printer TLP400
- Toast Tap (On Counter and Direct Mount)
- Toast MSR and EMV
- Toast Hub
- Toast Scale
- Toast Barcode Scanner
Elo Terminals and Accessories
- Elo POS Z10, Z20, Z30, 15", 17", 22"
- Elo Guest-Facing Display
- Elo POS Pack
- Elo I-Series Terminals 10", 15", 17", 22", 24"
- Elo E-Series Terminals 15"
- Elo Kitchen Display System, Elo KDS
- Elo 90-Series Screens
- Elo Medical Touchscreens
- Elo Touchscreen Signage / Interactive Displays
- Elo Edge Connect Accessories (MSR, Status Light, RFID)
Epson Printers
- Epson TM-T20 II
- Epson TM-U220B
- Epson TM-M30
- Epson TM-T88V
- Epson TM-L90
General Features Printer Tray PN 50313
-
This Shelf Edge, Countertop or wall mount can be used as a universal mounting bracket for Point of Sale / POS printers in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
-
Designed with pre-punched mounting holes along both sides and the rear section to allow easy attachment to any shelf edge, wall or other flat vertical surface.
-
Supports printers up to 6.5” wide and 10” long and up to 10 lbs.
-
When attaching the mount along the rear section the tilt angle is set at 20 degrees to improve access to the paper feed slot on the top of the printer.
-
Includes a cable path hole on the bottom to allow access to outlets located below the tray and cable tie points at both rear corners.
-
When used with most standard-length printers there is sometimes enough room behind the printer to store the power supply and cords or use the version with the separate storage compartment.
-
Made entirely of brushed stainless steel to resist harsh environments. Stress points are reinforced with tack welds to provide additional reinforcement.
We believe in ethical SEO relevancy; the following section was included to assist the all-knowing algorithms in locating this page; however, some humans like it too.
-
Wall Mounts for Toast Printers, Wall Mounts for Epson Printers, Shelf edge mounts for Toast Printers, Shelf edge mounts for Epson Printers, Pole mounts for Toast Printers, Pole mounts for Epson Printers, Under counter mounts for Toast Printers, Under counter mounts for Epson Printers, Counter top mounts for Toast Printers, Counter top mounts for Epson Printers, Floor stands for Toast printers , Floor stands for Epson Printers, Pole stands for Toast Printers, Pole stands for Epson Printers, Kiosks for Toast Printers, Kiosks for Epson printers.
