Wall Mount with a 6” riser, 8” arm, 75/100mm VESA Screen Pan and Tilt Head

• For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.

General Features

• This wall mount can be used as a universal support system for VESA compatible monitors, touchscreens and terminals for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications.
• An innovative set of joint assemblies allow four axis of position adjustment when attached to a wall or other vertical surface.
• This assembly supports up to 15 lbs., is made from steel and finished with a durable, black, low gloss, micro wrinkle powder coat that resists fingerprints.
• Visit kitchendisplaysystems.com for a free, easy to understand tutorial that covers all aspects of Kitchen Display Systems knowledge!

Standard VESA 75-100mm Pan and Tilt Head on an Adjustable Arm

• A universal mount that works with any 75mm or 100mm VESA compatible screen.
• Tightening the 2 four-point knobs applies variable clutching resistance to allow adjustment of the up and down tilt position of the screen. Tighten either of the two 10-32 Phillips head screws adjacent to the four-point knobs to permanently secure the tilt position.
• Tightening the five- point knob below the end of the Arm applies variable clutching resistance to allow adjustment of the side-to-side pan position of the screen.
• Tighten the 10-32 Phillips head screw on the lower Panning plate into one of the holes in the end of the arm to permanently secure the pan position.
• Includes 4 pieces of M4 Phillips head screws to attach the VESA mounting plate to the back of the screen.

Riser, Riser Cap and Arm

• The Riser Cap allows an arm to rotate around the top of a Riser assembly.
• Loosening the three - point knob on the side of the Riser Cap allows adjustment of the side-to-side pan position of the arm around the riser assembly. Tightening the knob locks the position of the arm.
• The Riser cap incorporates a cable tie point to secure the cables so that they will travel safely as the arm is rotated.
• The Riser Cap interacts with the Riser Cap Stop on the side of the Riser to prevent the arm from making a full rotation around the riser. Refer to the Riser and mounting plate section for instructions on setting the position of the Riser Cap Stop.

Single Wall Mounting Plate with Stand- Off Bracket, Riser, Riser Cap and Arm

• The Riser section elevates the arm above the mounting surface and permits the screen pan and tilt head, or printer tray, to travel horizontally allowing a wide range of positioning options.
• Attach the mounting plate to the Wall or other flat vertical surface with appropriate fasteners.
• Note that the Standoff bracket and arm can be attached to the mounting plate with the mounting plate in either vertical or horizontal orientation.
• Evaluate the side-to-side range of motion of the arm that are attached to the Riser Cap.
• The Riser Cap Stop prevents the Riser cap and arm from rotating a full 360 degrees around the Riser. It may be advantageous to relocate the stop position to optimize the side-to-side range of motion of the arm for your application.
• To reset the position of the Riser Cap Stop; slightly loosen the 5/16-18 bolt with a ½” wrench, slightly loosen the 10-32 Phillips head riser lock screw on the underside of the Stand Off Bracket; carefully rotate the riser to locate the stop at the new desired position; then retighten the bolt and screw.
• The Single mounting plate includes slots so that it can be attached to poles with compatible hose clamps.
• The Riser Cap incorporates a cable tie point to secure the cables so that they will travel safely as the arms are rotated.

We believe in ethical SEO relevancy; the following section was included to assist the all-knowing algorithms in locating this page; however, some humans like it too. 

• VESA wall mount, VESA wall mounting bracket, VESA wall mount bracket, Screen wall mount, screen wall mounting bracket, screen wall mount bracket, monitor wall mount, monitor wall mounting bracket.
• Monitor wall mount bracket, POS terminal wall mount, POS terminal wall mounting bracket, POS terminal wall mount bracket, Point of Sale POS terminal wall mount, Point of Sale terminal wall mounting bracket.
• Point of Sale terminal wall mount bracket, KDS wall mount, KDS wall mounting bracket, KDS wall mount bracket, Kitchen Display System wall mount, Kitchen Display System wall mounting bracket. Kitchen Display System wall mount bracket, Kitchen production System wall mount, Kitchen Monitor wall mount.
• Kitchen video wall mount. Touchscreen wall mount, All in One PC wall mount, Healthcare monitor wall mount, Industrial process monitor wall mount, Kiosk wall mount, Office monitor wall mount, manufacturing process monitor wall mount.