Pole Mount + 8” arm + Ingenico Lane Reader Pan - Tilt Head

$205.00
In stock
Product Code
80420-ING-QC
More Information
Product Code 80420-ING-QC
Availability In Stock
Delivery Time 1-7 Days
Note Product usually ships within 24 hours of payment/order.
  • For complete specifications of this assembly; download the PDF Product Information Sheet; click the "Product Attachments" tab in the middle of this page.
  • Includes a pole mounting plate with a fixed arm that allows the Reader Pan and Tilt Head to be supported approximately 8” out from the mounting surface.
  • The mounting plate includes four horizontal slots so that screws can be inserted to secure the mount to a pole.
  • The mounting plate includes four vertical slots so that hose clamps (not included) can be inserted to secure the mount to a pole.
  • Beyond having flexible articulation; this mount has the key feature of being easily LOCKED in any desired reader position; this ability is VERY important when using a PIN pad as it PREVENTS the Reader from moving away from the user each time a touch is input.

Overview

  • These mounts are designed to be the highest quality and most durable support systems available and are compatible with Ingenico Readers Lane 3000, 5000 v.2, Lane 7000, 8000 and all future reader models equipped with the Lane clip mounting standard. 
  • See the last pages of this document for a list of preconfigured assemblies that support the Ingenico Lane Readers in some of the more common mounting scenarios.
  • If you need more mounting options, know that all of the VESA compatible mounting systems included on our website can be modified to support the Ingenico Lane Readers.
  • If your application requires a quantity of special use mounting systems; contact our design team for quick turnaround on custom solutions.
  • No special tools are required to adjust the position of the reader on these mounts; easy to operate hand knobs are used to apply variable clutching resistance to the pan and tilt assembly to securely lock the position of the reader.
  • The up and down tilt position of the reader is adjusted by tightening the 2 four-point knobs on the side of the Pan and tilt assembly. Tighten either of the two 10-32 Phillips head screws adjacent to the four-point knobs to permanently secure the tilt position.
  •  The side-to-side pan position of the reader is adjusted by tightening the five- point knob below the end of the Arm. Tighten the 10-32 Phillips head screw on the lower Panning plate into one of the holes in the end of the arm to permanently secure the pan position.
  • Note that the pan and tilt head assembly can also be used to support any screen that has the 50, 75 or 100mm VESA mounting standard with the Ingenico Lane clip removed.
  • These assemblies are made almost entirely of steel with a durable, micro wrinkle, semi-gloss black, powder coat finish.
  • Also known as Ingenico Lane Reader Mount, Ingenico Lane retail PIN Pad Mount, Ingenico Lane Tap Touch Reader Stand, Ingenico Lane Smartcard Reader Stand,  Ingenico Lane Multi-Clip mount, Ingenico Lane Clip Mount, Ingenico Lane Clip Back Plate, Ingenico Lane PIN Pad mount, Ingenico Lane Locking Plate Clip, Ingenico Lane quick connect clip.
  • This mounting package includes the following individual product components PN 67095, PN 67080, PN 21237.

Ingenico Lane Pan and Tilt Head on a Fixed Arm

  • A universal mount that works Ingenico Lane 3000, 5000 v.2, Lane 7000, 8000 and future readers equipped with the Ingenico Lane clip mounting standard.
  • Tightening the 2 four-point knobs applies variable clutching resistance to allow adjustment of the up and down tilt position of the reader. Tighten either of the two 10-32 Phillips head screws adjacent to the four-point knobs to permanently secure the tilt position.
  • Tightening the five- point knob below the end of the Arm applies variable clutching resistance to allow adjustment of the side-to-side pan position of the reader.
  • Tighten the 10-32 Phillips head screw on the lower Panning plate into one of the holes in the end of the arm to permanently secure the pan position.

Mount Arm Features

  • The mount arm can be attached to poles three different ways with a wide range of outside diameters.
  • One attachment option for round pole diameters from 1” to 2.5” is to install self-drilling screws through the horizontal slots at the top and bottom of the angle section.
  • To attach the mount to a round pole that is one inch or larger in diameter with hose clamps. Insert the clamps through the slim vertical slots at the top and bottom of the angle section. Refer to the hose clamp range list to select the correct size clamps for your pole diameter.
  • The arm assembly is made entirely of stainless steel and can be tack welded directly to standard round stainless steel shelve support poles commonly found in commercial kitchens.
  • This assembly supports touch screens, terminals or flat panel monitors up to approximately 22” or 15lbs. (some images are shown with a 17” screen installed).
  • The mount arm can also be attached to the corners of any square or rectangular pole that is one inch or larger in diameter with self-drilling screws or hose clamps.
  • The mount arm includes circular openings on the top and bottom surfaces and at the angle section where it contacts the pole to allow for internal routing of data and power cabling.

Relevant Search Terms and SEO

The Universal Tap Touch Reader VESA Mounting Plate is compatible with the following readers, technologies and mounting applications:

  • Ingenico UPM, Universal Payment Mount, Ingenico Quick Connect Clip, Quick Clip
  • Tap reader, touch reader, Schlage MT20, RFIDeas, RF IDeas, WAVE ID Plus.
  • Transact Campus PS4101, Square reader, Clover Go Contactless Reader, Glossgenius.
  • HID Mobile Access, Schlage Electronics. Allegion, TSL Mobile, ProxPoint Plus, UHPPOTE.
  • VIVOpay, Speco, HID OMNIKEY, HP USB Universal Card Reader, ON TRACK INNOVATIONS.
  • Ingenico Mobile Solutions, Linear Reader, Shopify Tap, CHERRY SmartTerminal, ThingMagic.
  • iCLASS, Omnikey HID, smartphone, Multi-Technology Enrollment Reader, USB Reader.
  • Smartcard Reader, Contactless Card Reader, Digital Wallet, merchant card, Credit cards.
  • Smart card, Proximity Reader, BLE Smart Card Readers. Credential reader, campus payments.
  • One card campus ID's, college commerce card, Proximity ID badge reader, RF proximity reader.
  • SwipeSimple, badge reader, smart device, Mobile Credential, NFC technology, ApplePay, Apple Pay.
  • AndroidPay, Google Pay, Google Pay for Android, Samsung Pay, Amazon Pay, Paytm, Cash App.
  • Wise, Venmo, PayPal, Zelle, Skrill, Alipay, Walmart Pay, Dwolla, Touch Reader VESA Mounting Plate.
  • Back of screen reader VESA mount, Tap Reader VESA Mounting Plate.
Write Your Own Review
You're reviewing:Pole Mount + 8” arm + Ingenico Lane Reader Pan - Tilt Head
Pole Mount + 8” arm + Ingenico Lane Reader Pan - Tilt Head
Copyright © 2024 Practical Quality Systems